Abhash:

It doesn’t seem that you are in the single trace mode because in the upper menu 
you don’t get to see the Azimuth (h) option. Try typing “t” until you switch to 
single trace mode and the Azim (t) option appears on the top menu.

Regards,

Antonio

Antonio A. Abrego M.
Ingeniero Civil
Unidad de Ingeniería Geotécnica
División de Ingeniería
Tel. 276-1989
E-Mail: [email protected]<mailto:[email protected]>

From: [email protected] [mailto:[email protected]] On Behalf Of 
Abhash Kumar
Sent: Wednesday, January 20, 2016 2:19 PM
To: Edgar G. Paz Martínez
Cc: [email protected]
Subject: Re: [seisan] seisan Digest, Vol 95, Issue 8

Hi Edgar,
     I selected single trace (Z-component) after launching eev and then picked 
both P and S-phase on the Z-component (as attached). I then pressed "h", but I 
did not get azimuth at the bottom line (as you can see in the attached screen 
shot). I would be grateful if someone can send me the suggestion in little 
detail.
Best regards
Abhash kumar

On Wed, Jan 20, 2016 at 2:06 PM, Edgar G. Paz Martínez 
<[email protected]<mailto:[email protected]>> wrote:

Abhash:

You must be on eev's single trace mode before you press h.
Le 20 janv. 2016 12:58, 
<[email protected]<mailto:[email protected]>> a écrit :
Today's Topics:

   1. Event location from 3-component single station (Abhash Kumar)


----------------------------------------------------------------------

Message: 1
Date: Wed, 20 Jan 2016 13:49:43 -0500
From: Abhash Kumar <[email protected]<mailto:[email protected]>>
Subject: [seisan] Event location from 3-component single station
To: [email protected]<mailto:[email protected]>, Lars Ottemoller 
<[email protected]<mailto:[email protected]>>,
        Jens Havskov <[email protected]<mailto:[email protected]>>

Hi,
   I am trying to locate events using data from a single 3-component
station in Seisan 10.3. I picked two phase arrivals and need to find out
azimuth to get the location. I thoroughly read the manual and it says:

"If a 3 component station is available, the azimuth of arrival can be
determined using the method developed by Roberts et al. [1989]. Display any
of the 3 components and press h (Azim). Then select a zoom window around
the P-arrival of a few secs duration for the analysis. The 3 components
will now be displayed below  in order Z, N and E and the calculated
azimuth, apparent velocity and correlation will be displayed at the bottom
line."

I am using eev to display all the three components with P and S phase
picked on the Z and E-component (as attached). I pressed "h" and then zoom
around the P-pick, but I don't see any azimuth values at the bottom line.
The eev screen is full of three components and there is no space at the
bottom line to display anything. I looked at the example figure in the
manual (as attached) and thought that I may have to pick both P and S on
the Z-component for time being and then press "h" to get the azimuth, but
even that does not seem to work. I would be extremely grateful for any
suggestions.

Best regards
Abhash kumar
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/html
Size: 1410 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Phasepick.PNG
Type: image/png
Size: 182747 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Manual figure.PNG
Type: image/png
Size: 60029 bytes
Desc: not available
URL: 
<http://mailman.uib.no/private/seisan/attachments/20160120/faa89691/attachment-0001.png>

----------------------------------------------------------------------
Send seisan mailing list submissions to
        [email protected]<mailto:[email protected]>

To subscribe or unsubscribe via the World Wide Web, visit
        http://mailman.uib.no/listinfo/seisan
or, via email, send a message with subject or body 'help' to
        [email protected]<mailto:[email protected]>

You can reach the person managing the list at
        [email protected]<mailto:[email protected]>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of seisan digest..."


_______________________________________________
seisan mailing list
[email protected]<mailto:[email protected]>
http://mailman.uib.no/listinfo/seisan


End of seisan Digest, Vol 95, Issue 8
*************************************

_______________________________________________
seisan mailing list
[email protected]<mailto:[email protected]>
http://mailman.uib.no/listinfo/seisan

_______________________________________________
seisan mailing list
[email protected]
http://mailman.uib.no/listinfo/seisan

Reply via email to