Hi,
I have located events using data from a single 3-component station in
Seisan 10.3. I tested three starting depths (2km, 1km and 0.1 km) and for
each case final depth is same as the starting depth. According to the
manual (section 6.1.1), to locate with one station, azimuth and P and S,
TEST(56) must be set to 1, but then the depth will be fixed to the starting
depth. The manual suggest to set the value of starting depth to a value
smaller then the hypocentral distance in STATION0.HYP file. The format
defined for starting depth in STATION0.HYP is f5.0, which implies that the
starting depth cannot be smaller than 1km. I checked the manual and I
couldn't find any other test parameter that could be modified to avoid the
problem of fixed depth and set the starting depth less than 1km. I would
be extremely grateful for any feedback.Best regards Abhash kumar
STATION0.HYP
Description: Binary data
_______________________________________________ seisan mailing list [email protected] http://mailman.uib.no/listinfo/seisan
