Sachin,
It seems that SEMS ignores the end-bit set by the phone. It will have to
be fixed.
However, I'm missing my beloved test SIP phones this week... Anybody
whishing to do some tests for me?
Cheers,
Raphael.
On 25.01.2010 17:19, Medakkar, Sachin (Sachin) wrote:
Thanks for replying so quickly.
The pin I'm entering is 3309. I've attached 2 trace files.
The first is for the error path in which only one 3 from the pin is
captured. The second trace file is where the digits were pressed
slower than in the error scenario such that all the digits were
successfully captured as expected.
------------------------------------------------------------------------
*From:* Raphael Coeffic [mailto:[email protected]]
*Sent:* 25 January 2010 16:07
*To:* Medakkar, Sachin (Sachin)
*Cc:* [email protected]
*Subject:* Re: [Sems] Configuring DTMF Timeout
On 25.01.2010 16:51, Medakkar, Sachin (Sachin) wrote:
I'm using the Voicebox application as it comes out-of-the-box and am
defining the pin that should be prompted for in the P-App-Param header
Do you have a trace?
-Raphael.
------------------------------------------------------------------------
size=2 width="100%" align=center tabindex=-1>
*From:* [email protected]
<mailto:[email protected]>
[mailto:[email protected]] *On Behalf Of *Raphael Coeffic
*Sent:* 25 January 2010 15:47
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [Sems] Configuring DTMF Timeout
On 25.01.2010 16:25, Medakkar, Sachin (Sachin) wrote:
Hi --
When detecting DTMF to collect a pin to access Voicebox, I've noticed
that if the pin contains more than 1 consecutive number that is the
same (e.g. 3309), SEMS does not recognise the number entered if I
enter the pin relatively quickly. This behaviour if not reproduced if
the numbers are different (e.g. 3039).
Could you tell me whether this is a configurable item and where this
behaviour is defined so that I may modify it as required.
Could you please tell us hwo the DTMF are transported? If these are
real tones, I'm afraid you will have to change some constants in the
code. Please search in the list archive as there should at least a
couple of threads discussing the issue.
Cheers,
Raphael.
Kindest regards,
Sachin
_______________________________________________
Sems mailing list
[email protected] <mailto:[email protected]>
http://lists.iptel.org/mailman/listinfo/sems
_______________________________________________
Sems mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/sems
