Hello,
FYI - We are trying to make SER and SEMS to communicate in that way we can
establish a conference call communication.
We are using ser 0.9.6 and SEMS 1.1.1
We made the changes recommended, but are getting the following errors:
We are trying to make SER and SEMS to communicate in that way we can establish
a conference call communication.
We are using ser 0.9.6 and SEMS 1.1.1
We are getting errors:
0(5411) : <core> [cfg.y:2613]: *** PARSE ERROR *** (86,36-37): unknown command,
missing loadmodule?
0(5411) DEBUG: <core> [mem/q_malloc.c:411]: qm_malloc(0x820bd60, 24) returns
address 0x8244e40 frag. 0x8244e28 (size=24) on 1 -th hit
ERROR: bad config file (2 errors)
One of the error is showing in the line :
append_hf("P-App-Name: conference\r\n");
if (uri=~"^sip:[0]")
{
append_hf("P-App-Name: conference\r\n");
t_relay_to_udp("172.16.100.193","5060");
break;
}
What module area is missing?
These are our modules in ser.cfg
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
modparam("usrloc", "db_mode", 0)
modparam("rr", "enable_full_lr", 1)
modparam("tm", "fr_inv_timer", 15000) # time we will wait for an invite
to be replied (non-provisional response is received)
modparam("tm", "fr_timer", 10000) # provision
Any suggestions? Thank you for assistance in advance.
Thanks - Liza
________________________________________
From: Stefan Sayer [[email protected]]
Sent: Tuesday, February 23, 2010 7:42 AM
To: Liza Przyllas
Cc: [email protected]
Subject: Re: [Sems] Need help with sems
Hello,
Liza Przyllas wrote:
> Hello,
>
> We are running SER.CFG and we are using SEMS 1.1.1. How can we make the two
> communicate? Do we use forwarding to the port - rewrite host port or do we
> need to add in SER.CFG that module sipctrl.so ?
>
> We are a little confused as to how to make the two programs communicate with
> each other. Since we are no longer using ser_sems.cfg
>
> Any suggestions?????
assuming that you run SEMS on the same server on port 5080, just use
something like:
if (uri=~"sip:3.*") {
append_hf("P-App-Name: conference\r\n");
t_relay_to_udp("127.0.0.1","5080");
break;
}
in ser.cfg. If you run SEMS on another server or port, change the
server IP/port in t_relay_to_udp.
hth
Stefan
>
> Thanks - Liza
> _______________________________________________
> Sems mailing list
> [email protected]
> http://lists.iptel.org/mailman/listinfo/sems
>
--
Stefan Sayer
VoIP Services Consulting and Development
Warschauer Str. 24
10243 Berlin
tel:+491621366449
sip:[email protected]
email/xmpp:[email protected]
_______________________________________________
Sems mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/sems
