Hello everyone,
I installed OpenSER 1.2 and SEMS 0.10 but I am having problems making them
work togeather. The point is: once I launch both programs, and try to make a
call directed to sems, I get the following message on the debug screen of
SEMS :
*(15652) WARNING: wait4data (AmCtrlInterface.cpp:265): poll timed out
(15652) ERROR: send_msg (AmServer.cpp:135): while waiting for Ser's response
(15652) ERROR: onInvite (AmSession.cpp:595): 500 could not send response*
and the following on the OpenSER debug screen :
*1(15783) ERROR: tsend_dgram: failed to send: (13) Permission denied
1(15783) ERROR:tm: _reply_light: can't generate 500 reply when a final 200
was sent out
1(15783) ERROR:tm:unixsock_t_reply: reply failed
1(15783) ERROR: tsend_dgram: failed to send: (13) Permission denied
1(15783) unix_server_loop: Command 't_reply' failed with return value -1*
Here is my SEMS config file :
# Sip Express Media Server (sems)
#
# sample configuration file
#
#
# whitespaces (spaces and tabs) are ignored
# comments start with a "#" and may be used inline
#
# example: option=value # i like this option
#
# parameter: plugin_config_path=<path>
#
# - in this path configuration files of the applications
# (e.g. announcement.conf) are searched
plugin_config_path=/usr/local/etc/sems/etc/
# optional parameter: fork={yes|no}
#
# - specifies if sems should run in daemon mode (background)
# (fork=no is the same as -E)
fork=yes
# optional parameter: stderr={yes|no}
#
# - debug mode: do not fork and log to stderr
# (stderr=yes is the same as -E)
stderr=yes
# optional parameter: loglevel={0|1|2|3}
#
# - sets log level (error=0, warning=1, info=2, debug=3)
# (same as -D)
loglevel=2
# optional parameter: default_application
# - this application is executed if the application is
# not explicitely set with P-App-Name header/appname
# parameter of unix command.
#
# example:
# default_application = conference
# optional parameter: socket_name=<filename>
#
# - path and file name of our unix socket
# (where ser writes messages to)
socket_name=/tmp/sems_sock
# optional parameter: reply_socket_name=<filename>
#
# - path and file name of the unix socket where we
# get replies from ser
reply_socket_name=/tmp/sems_resp_sock
# optional parameter: ser_socket_name=<filename>
#
# - path and file name of Ser's unix socket
# (where we write messages to)
ser_socket_name=/tmp/ser_sock
# optional parameter: plugin_path=<path>
#
# - sets the path to the plug-ins
# - may be absolute or relative to CWD
plugin_path=/usr/local/lib/sems/plug-in/
# optional parameter: rtp_low_port=<port>
#
# - sets lowest for RTP used port
rtp_low_port=10000
# optional parameter: rtp_high_port=<port>
#
# - sets highest for RTP used port
rtp_high_port=60000
# optional parameter: media_processor_threads=<num_value>
#
# - controls how many threads should be created that
# process media - on single-processor systems set this
# parameter to 1 (default), on MP systems to a higher
# value
media_processor_threads=1
# optional parameter: listen=<ip_address>|<device>
#
# - this informs SEMS about the interface where its SER is
# bound to. SEMS needs this information to correctly set
# the contact header in outgoing calls and registrations.
# Should be set to equal the 'listen' configuration option
# in ser_sems.cfg.
# If not set, this defaults to the interface SEMS binds to.
# Examples:
listen=192.168.202.9
# listen=eth0
#sip_port=5060
# default=300 (5 minutes)
#
# Examples:
# # disable RTP timeout
# dead_rtp_time=0
# # RTP timeout after 10 seconds
# dead_rtp_time=10
The call initiates but stopes one second later. I guess it is a socket
problem but can not find any solution. Does anyone knows about this point
and eventually has a solution ?
Thank you very much for you help :)
Skender
_______________________________________________
Semsdev mailing list
[email protected]
http://lists.iptel.org/mailman/listinfo/semsdev
