Atle Samuelsen pisze: > Hi Again. > > * Raphael Coeffic <[EMAIL PROTECTED]> [080819 10:48]: > >> Atle Samuelsen wrote: >> >>> Great to hear that you ahve written A ISDN gateway for sems. >>> Sems had back in the days a ISDN gateway wich was useing isdn4linux and >>> worked with most isdn cards. >>> >>> >> Yes, you are right. I just wanted to have some comments from people that >> could maybe test a little bit with other cards, or maybe with more than one >> card, just to get some confidence. >> > Ah, Sounds like a good idea :) though, can maybe be alittle hard since > sems has not had support for ISDN for a few years, and people are > proberbly useing asterisk at the moment. > > So, my opion is that it should be put into SVN streight away, and > Grzegorz can continue checking in code. He might also get some "free" > help of the old isdn module. > > Actualy i have started from trying to update old module and than decided to start over from scratch. Sems have changed a lot too during those few years. As for hardware it should work with all cards supported by mISDN http://www.misdn.org/index.php/MISDN_compatible_Hardware http://www.linux-call-router.de/cards.html i'm quite sure that if someone was able to use asterisk witch chan_misdn should be able to use gateway module too. One more note: only TE mode is suported currently - co you may connect it to isdn line not isdn phone.
Grzegorz Stanislawski _______________________________________________ Semsdev mailing list [email protected] http://lists.iptel.org/mailman/listinfo/semsdev
