In a message dated 9/28/00 4:41:24 PM Pacific Daylight Time, [EMAIL PROTECTED]
writes:
<<
<< B14 SE-R's have bigger front brakes than the 1.6er's right? >>
Yes they do. They bolt right on. You need the calipers and rotors.
>>
DON'T forget the caliper mounting brackets they are taller than the 1.6's to
fit over the larger rotors off a SE-R, you may not need the other calipers as
some Sentras came with the same caliper as what's on the SE-R only difference
is they have the smaller rotor and a smaller in height caliper mounting
bracket, that is why you'll need the SE-R's caliper mounting bracket to mount
onto the Sentra's calipers, that way it will be a little taller and fit the
SE-R's rotors, it's all just a bolt on when you get the correct parts. Also
make sure you get the correct rotors/calipers for the SE-R there are 2 kinds,
American made ones and Japan made ones, don't mix the 2 up as the ones made
in Japan are a little wider than the American made ones, the Japan calipers
will fit the American made rotors but as the disk pads wear down they will
push in and the caliper pistons will push out to far and one day you'll wont
have any brakes, just make sure what ever way you go NOT to mix these parts
up and when it comes time for replacement parts and if your using Japan
calipers/rotors don't let somebody sell you the American calipers/rotors or
you'll get messed up there also, just use one kind or the other and stick
with those parts. Easiest way to do it if your don't know how to tell the
difference get the parts off a SE-R at a whecking yard and stay with those
parts, but make and keep a note to your self what year SE-R they came off of.
Good Luck with your brakes, you'll like the difference, I know I did.
Ron
