In a message dated 1/24/01 8:56:43 PM Pacific Standard Time,
[EMAIL PROTECTED] writes:
> Did you have to remove the front cover and timing gear, or just wire tie the
> sprokets to the chain and unbolt the cams and mearly remove them and
> replace
>
I used white out to mark the chain and gear positions. I removed the front
cover, motor mount and brace on my 95. The cams are going to made to use the
stock shims. You still have to check the clearances to be safe. My head did
not need any other shims. I don't know what the cost will be for the
production cams.
Mike Saiki
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
