I recomend use an MSD Ignition SCI 6300 and NGK NE08 or ACCEL 7942 Spark Plug Wires, also use an MSD Super Sport Blaster Ignition Coil The installation it´s very easy. ----- Original Message ----- From: "Marlon K. Gokim" <[EMAIL PROTECTED]> To: "Sentra Mailing List" <[EMAIL PROTECTED]> Sent: Tuesday, February 06, 2001 12:19 PM Subject: SML: Turbo GA16 > I just want to ask those who have extensive experience with tuning a GA16 > motor for forced induction (i.e. turbo) like Mike Kojima because I have a > custom turbo kit which includes a Garrett T25 turbo with intercooler, > blow-off valve, fuel pressure riser, etc. which I got from my friend's '95 > Nissan Sentra. I'm planning to install it to my '95 Sentra. My current > mods include intake, headers, UR pulley, lightened flywheel, and an APexi > SAFC. My problem is I don't have access to JWT ECU, which I am fully aware > you highly recommend because I'm in the Philippines and it would really be > difficult to have it reprogrammed by JWT. My friend's car ran quite fast > even without the ECU reprogrammed. He had the turbo on his car for more > than 2 years without any major mechanical problems. > > I just want to get your opinion and advice because I'm already planning to > install the kit next month. If you guys could give tips on PROPER TUNING > (i.e. how many degrees to be set for the timing, etc.) to avoid DETONATION > and others things which I should do before I run the car, I would greatly > appreciate it! I don't have access to a dyno here. Is it okay if I go with > 2.5" exhaust piping from the turbo to the muffler since we don't have any > regulations here re: cat back system? Will the Apex SAFC and the fuel > pressure riser suffice for the fuel enrichment in place of the JWT ECU since > the T25 turbo is not too big anyway and I'll just be running the car at > minimum boost, 6-7psi only? Does anybody know the best setting of the Apex > SAFC for the GA16 with turbo? Should I set the fuel leaner at higher rpm or > which rpm range should have the most fuel input? etc. > > Thanks in advance! > > > > > > +----------------------------------------------------------------------+ > List archives ==> http://www.escribe.com/automotive/sml > Have a question? Try the archives first. > > +----------------------------------------------------------------------+ List archives ==> http://www.escribe.com/automotive/sml Have a question? Try the archives first.
