Sounds good but I doubt it works. The intake charge travels so fast into the
combustion chamber, that there is no time for it to absorb any heat.
> I have been talking to a member of the Probe list who developed Phenolic
> Spacers. It is a spacer that lifts the intake manifold away from the heat
of
> the block. Anyway I am a veterinarian. This is the site address and below
> that is his address to reach him if you are interested. He has given
interest
> to making a spacer for the sr20 but did not think there would be much
> interest for the ga16. I have no way of telling you how accurate the
dyno's
> are. I will tell you that there are 100's of members on the probe list
that
> have bought this mod for their car. Anyway look at the site and make a
> decision.
>
> The site: http://home.san.rr.com/scmorgan/spacers
>
> His address follows as well: [EMAIL PROTECTED] (Sean C. Morgan)
>
> This was his letter to me.
>
> Marcus,
> We have considered Nissan applications, but have leaned more toward
the
> SR20DE with it's greater performance potential. However, if there is
> demand, anything is possible.
>
> Thank you,
> Sean Morgan
> Outlaw Engineering
> http://home.san.rr.com/scmorgan/spacers
>
> Maybe we can get a cheap performance mod out of this.
> Marcus
>
>
+----------------------------------------------------------------------+
To unsubscribe, put "unsubscribe" (by itself) in the subject and send to
[EMAIL PROTECTED] or use the form at http://www.sentra.net/sml
