>Will the ES torque member inserts for the SE-R fit the GA16DE?
>
For a b14 quoted from http://www.sentra.net/project/scc-12-00.shtml
"Like their SE-R cousin, the GA16DE-powered cars also suffer from overly
soft engine mounts. This allows the engine to crash
around during shifting and when launching the car. This beating around and
the wheelhop that the moving engine can cause,often results in broken
drivetrain parts. To help prevent this, we found that the lower engine mount
and the front dogbone mounts are the same as the SE-R. This means the parts
can be upgraded by Energy Suspension's engine mount kit for the SE-R. Since
these mounts do most of the fore and aft engine retention, they are the most
critical mounts to reinforce. The
Energy Suspension mounts are made of hard polyurethane and are inserts that
fill the airspace cast into the soft rubber stock mounts to allow the mount
to flex. By filling these hollows, the Energy mounts significantly stiffen
the mount and can be used to help rebuild old torn engine mounts.
The energy engine mounts really helped reduce wheelhop, improved throttle
response and slightly increased felt vibration at"
Javier
idle; a tradeoff that we felt was worth it.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
+----------------------------------------------------------------------+
Have questions about your car? Try here: http://www.sentra.net
