i was installing the wiper inserts the other morning, i hate these things, id rather do an axle than change the stupid wiper inserts, anyway,, i decided to tackle the mounts. i started with the passenger side front and then the driver side front, then i did the tranny mount underneath. They were fairly easy. the only pain was the tranny because you HAVE TO take off the cross member bar to get to the mount, its just another four easy bolts to take off. To position the new ones in, i put the jack under the ac compressor mount and it held up. the other two i used the small notch on the tranny that is right next to the cross member bar, just put a piece of wood between the jack and tranny. This all applies to a 94xe, auto. I am gonna see if i can send the old ones to place racing to see if they can make some. Energy doesnt do anything unless the cars there, and unless its a manual. if anyone has any install Q's email me.....tony +----------------------------------------------------------------------+ List archives ==> http://www.escribe.com/automotive/sml Have a question? Try the archives first.
