SERENDIP V.5 CRITICAL ERROR REPORT beam switcher appears to be *STUCK* Stuck
dr2 tail looks ok: Wed Oct 6 18:04:15 2010 : IDLING DATA ACQUISITION% The BEE2 is responding to pings: PING beecourageous (192.168.1.86) 56(84) bytes of data. 64 bytes from beecourageous (192.168.1.86): icmp_seq=1 ttl=64 time=0.646 ms --- beecourageous ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.646/0.646/0.646/0.000 ms The iBOB is responding to pings: PING ddc (192.168.2.6) 56(84) bytes of data. 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=1.08 ms --- ddc ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 1.084/1.084/1.084/0.000 ms The data collection process is running as of Wednesday 06th October 2010 06:20:01 PM Attempting to restart the BEE... Power off command output: Power on command output: Attempting to restart the IBOB... Power off command output: Power on command output: Current Status: 1 ON 2 OFF 3 ON 4 ON 5 ON 6 OFF 7 ON 8 OFF Sleeping 60 seconds to wait for fpga devices to come back up... !!Success!! The iBOB has awoken: PING ddc (192.168.2.6) 56(84) bytes of data. 64 bytes from ddc (192.168.2.6): icmp_seq=1 ttl=64 time=1.10 ms --- ddc ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 1.106/1.106/1.106/0.000 ms !!Success!! The BEE2 lives! Sleeping 5 minutes to let the BEE2 boot... Attempting to restart the whole shebang... Check output below: root copying dr2_config_short into dr2_config copying old output files for safekeeping killing any previous setispec_dr runs killing old disk buf collector... killing previous ssh instances to run sendstatus on o...@beecourageous initalizing the iBOB 7 beam, 2 pol Number of beams: 7 Number of pols: 2 Number of cycles: 1 Dwelltime: 1 Max address: 14 0x0000 / 00000 -> 0x000000ED / 0b00000000000000000000000011101101 / 0000000237 0x0001 / 00001 -> 0x000000EB / 0b00000000000000000000000011101011 / 0000000235 0x0002 / 00002 -> 0x000000E7 / 0b00000000000000000000000011100111 / 0000000231 0x0003 / 00003 -> 0x000000DE / 0b00000000000000000000000011011110 / 0000000222 0x0004 / 00004 -> 0x000000DD / 0b00000000000000000000000011011101 / 0000000221 0x0005 / 00005 -> 0x000000DB / 0b00000000000000000000000011011011 / 0000000219 0x0006 / 00006 -> 0x000000D7 / 0b00000000000000000000000011010111 / 0000000215 0x0007 / 00007 -> 0x000000BE / 0b00000000000000000000000010111110 / 0000000190 0x0008 / 00008 -> 0x000000BD / 0b00000000000000000000000010111101 / 0000000189 0x0009 / 00009 -> 0x000000BB / 0b00000000000000000000000010111011 / 0000000187 0x000A / 00010 -> 0x000000B7 / 0b00000000000000000000000010110111 / 0000000183 0x000B / 00011 -> 0x0000007E / 0b00000000000000000000000001111110 / 0000000126 0x000C / 00012 -> 0x0000007D / 0b00000000000000000000000001111101 / 0000000125 0x000D / 00013 -> 0x0000007B / 0b00000000000000000000000001111011 / 0000000123 0x000E / 00014 -> 0x00000000 / 0b00000000000000000000000000000000 / 0000000000 rebooting the bee2 tcgetattr: Inappropriate ioctl for device killing previous sendstatus deleting previous nohup file killing running bofs loading new bofs nohup: appending output to `nohup.out' nohup: nohup: nohup: appending output to `nohup.out' appending output to `nohup.out' appending output to `nohup.out' configuring chips Setting the maximum number of hits to: 25 Setting the scale threshold to 80 done Connection to beecourageous closed. starting sendstatus starting diskbuf cleaner starting new run imdonenow Disk Usage: Filesystem Size Used Avail Use% Mounted on /dev/md1 226G 151G 75G 67% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 10M 92K 10M 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/md0 236M 35M 190M 16% /boot
