Thanks to James Cameron's work on FC22 kernel, I have an image of XSCE running in an SD card on an XO1.5.
The regular libertas driver works as a client. There is documentation for using a special driver, and special firmware at http://wiki.laptop.org/go/Libertas_Thinfirmware_HOWTO: http://wiki.laptop.org/go/Thinfirm_1.5 http://wiki.laptop.org/go/Test_Report Which I have attempted to follow. I have added config items(below) and created a new kernel. Questions; 1. The libertas_tf module loads via modprobe (after rmmod libertas cfg80211) Does this mean that it has found the firmware? 2. After blacklisting libertas, and a reboot, there is a new device sit0, which may indicate that the proper network driver is not being found/loaded.(dmesg is quiet about libertastf) 3. Are there incompatabilities between libertas_sdio and libertas_usb -- should it be one or the other? CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_DEBUG=y CONFIG_LIBERTAS_MESH=y CONFIG_FW_LOADER=y CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_LEDS=y
_______________________________________________ Server-devel mailing list Server-devel@lists.laptop.org http://lists.laptop.org/listinfo/server-devel