Tom Gilliard! Can you possibly test his below? Or let us know if ur busy!
From: Tim Moody <[email protected]> Date: Sun, Nov 22, 2015 at 9:40 AM Subject: RE: Latest XSCE version you read my mind; I was thinking it was time to turn to this. this would have to be on a xo-1.5 on 13.2.5 I have multiple ethernet dongles and a wifi dongle reputed to work as a hostap but not tried (when I plugged it in it got listed under ip addr, but there is an error about request for firmware failed.) -bash-4.2# nmcli d DEVICE TYPE STATE eth1 802-3-ethernet connected wlan0 802-11-wireless unavailable eth0 802-11-wireless unmanaged So the question is can you give me an initial set of connections and a list of operations to try? > From: Jerry Vonau [mailto:[email protected]] > Sent: Sunday, November 22, 2015 4:29 AM > Subject: Re: Latest XSCE version > > I would really appreciate if someone with a handful of usb network adapter > give PR501 a spin. I've tested all I can with 1 usb and 1 built-in by repeatedly > switching the network cables on a configured box(thus killing the gateway) > and running "./runtags network" on the NUC. If you're wondering that is > what the cause was of all the logins from my NUC on the vpn. I have not > been able to make the routine puke, so could someone try the same idea > but swapping different usbkeys please. > > For easier testing try > git checkout -b Nov21 > git remote add jv https://github.com/jvonau/xsce git pull jv Nov21 these two look to be the same thing; there's no Nov21 in XSCE I did git clone https://github.com/jvonau/xsce -b Nov21 --depth 1 is that what you want? > Fixes the wired slave that may not be available just after the change but is > available after a reboot issue that might occur occasionally and adds a bit > better recording of the network state. Should be safe for master if that > testing passes. If something does fail shoutout on irc and fpaste the xsce.ini > file and the point of failure. > > > On November 22, 2015 at 2:39 AM Adam Holt <[email protected]> > wrote: > > > > Spontaneous install notes from Tom Gilliard <[email protected]> in > > Bellingham, WA: > > > > http://wiki.sugarlabs.org/go/XSCE > > > > On Thu, Nov 19, 2015 at 6:27 PM, Tim Moody <[email protected]> > wrote: > > > > > PR 488 broke install-console for me on centos. not sure if that is > > > in this image. > > > > > > *From:* George Hunt [mailto:[email protected]] > > > *Sent:* Thursday, November 19, 2015 1:32 PM > > > *Subject:* Re: Latest XSCE version > > > > > > What I'm offering is a refresh of the tinycore install process which > > > Sora used earlier. The documentation for this can be lifted from > > > whatever she used then.
_______________________________________________ Server-devel mailing list [email protected] http://lists.laptop.org/listinfo/server-devel
