Thx. I got the two smtp servers running. I noticed you can run the same
server on multiple ports.
if you want to bind to multiple ports us command delimited list:
<bind>0.0.0.0:465,0.0.0.0:587</bind>
I just change the tls both to false.
<tls socketTLS="false" startTLS="false">
A quick FYI for people who don't know much about email... you can't set
both to true. it is one or the other.
I had to set jmxName to something different.
<jmxName>smtpserversecure</jmxName>
That is all I changed and I was able to get the system to come up.
-Mark
On Sat, Oct 26, 2019 at 9:46 PM Jerry Malcolm <techst...@malcolms.com>
wrote:
> Mark,
>
> I hit the same problem you are seeing about a month ago and reported it
> on the forum, but got no response. I was not using SSL on my previous
> version. I planned to move to SSL as part of my migration. I just
> figured the proble was due to lack of knowledge on my part and pushed it
> to the back burner. But since you had something working that no longer
> works, that gives me a different perspective on the problem. I'll
> probably start digging into the problem sometime this week. If anyone
> else already understands this problem, you won't hurt my feelings if you
> find the problem and report a fix before I have a chance to begin
> debugging it. :-)
>
> As far as ports go, you can have as many imap and smtp servers defined
> as you want. You can have an smtp server with no SSL running on 25 and
> completely different smtp server running on 587 with TLS. For every
> port you want to have an SMTP server, just replicate the <smtpserver>
> block inside <smtpservers> in conf/smtpserver.xml and make the obvious
> modifications to the new block. Also make sure you have a bind
> statement (<bind>0.0.0.0:465</bind>) in each block, and add the <tls>
> block to the smtpservers that you want to have ssl/tls on. I've run two
> smtp servers for years, one on port 25 and one on port 2025 that I tell
> my clients to use to get around isp blockading port 25 to prevent spamming.
>
> Jerry
>
> On 10/26/2019 5:17 PM, Mark Gordon wrote:
> > I have spent some time trying to get James 3.4 to work I have gotten
> past a
> > few problems. The latest is that I am getting a "keystore password
> > incorrect" and If I use the same keystore and config in 3.3 it works
> fine.
> > Any ideas?
> >
> > For inbound mail, can you only have port 587 open with START TLS? and
> not
> > have anything running on port 25?.
> >
> > With James can you have port 587 and 465 using ssl/tls and have 25 not?
> If
> > so how would one do this?
> >
> > Thanks,
> > Mark
> >
> >
> >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: server-user-unsubscr...@james.apache.org
> For additional commands, e-mail: server-user-h...@james.apache.org
>
>
--
Mark Gordon <m...@ordertech.com>
OrderTech Corporation | 819 W Fairmont Dr Ste 2 | Tempe, AZ 85282
*o:* (480) 285-1403 <4802851403> | *f:* (480) 464-5824 <4804645824> | *m:*
(602) 549-0488 <6025490488>
www.ordertech.com
LinkedIn <http://www.linkedin.com/company/ordertech-corp> | Twitter
<https://twitter.com/OrderTech> | Facebook
<https://www.facebook.com/OrderTech>
