HTTP GET (and REST services) will be supported by the servicemix-http component in the future...
Cheers, Guillaume Nodet On 5/10/06, Doug Fischer <[EMAIL PROTECTED]> wrote:
Thank you Peter. I was able to set it up with my internal ip address and therefore have access from external clients, since my it's in the NAT. Is there somehow to setup the servicemix-http SU endpoint to allow HTTP GET? Or some other way to do it? I will need to allow a GET at some point down the road and figured I would ask. Thanks, Doug On 5/10/06 2:01 PM, "Peter Klotz" <[EMAIL PROTECTED]> wrote: > Hi Doug, > > it should work if you use your local hostname instead of localhost. I had also > some problems in this area, when you have localhost I couldn't even connect > from > localhost. But when I had the local hostname in the config it worked. External > IP address should be ok too. > What does netstat -an |grep 8192 show? > (hope you are on Unix :-)) > Try to telnet to this port and write > POST / HTTP/1.1 > <return> > and see whether you get an connection or your server answers. HTTP GET will > not > work with the servicemix-http SU http endpoint. > > > Peter > > Doug Fischer wrote: >> I am configuring an http endpoint using the following: >> >> ... >> <http:endpoint service=²aaa:receiver² >> endpoint=²receiver² >> role=²consumer² >> locationURI=²http://localhost:8192/service² >> defaultMep=²http://www.w3.org/2004/08/wsdl/in-out² >> soap=²false² /> >> ... >> >> This works just fine and opens the port on localhost. What I would like to >> do is set it up so that someone from outside can connect to it, this does >> not seem to be the case with this configuration. This also does not seem to >> work if I change localhost to my external ip address. Can anyone tell me >> how I can simply open up a socket and have the ability to connect to it from >> any machine using my external ip address?
