Re: How to debug SA in eclipse

Fri, 05 Oct 2007 05:43:24 -0700 

Raj,
In your debug configuration (Debug -> Open debug dialog...) in Eclipse, you can choose which projects to include in the debug. So if you want to debug in multiple SU, you probably need to add more projects there. If you add the servicemix components as a project to your workspace (after generating eclipse projects by running mvn eclipse:eclipse), you can add them to the debug configuration and step through the internal servicemix code just as you would step through your own bean code. 


Gert

[EMAIL PROTECTED] wrote:

Hi,
I followed it and was able to start serviemix in debug mode on port 5005
But the problem is i can't switch between my jms consumer and bean SU.
I want to see what exactly is going in the servicemix.I mean step through
all the steps.
Is there a way to do that or is it I can't see anything going inside NMR
Regards,
Raj

Gert Vanthienen wrote:

  

Raj,



You might want to consider remote debugging in your case.  This means 
you just run the SA in a stand-alone ServiceMix container.  Using the 
remote debugger from Eclipse, you can then connect to the container.   
Have a look at 
http://incubator.apache.org/servicemix/remote-debugging-servicemix-in-eclipse.html 
for more information about that...



Gert

[EMAIL PROTECTED] wrote:

    

hi,

i still can't add serviemix server to eclipse 
can u tell me the exact steps in eclipse europa or myeclispe

raj

Zhurakousky, Oleg wrote:

  
      

If you want to debug or step through the code of the actual Service Mix,
then the links to the documents that you have provided describe exactly

what you need to do. I am not sure there is more to add. 
I used the same documentation last week to setup myself with ServiceMix

source environment and had no issues.


-----Original Message-----

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Thursday, October 04, 2007 2:26 PM

To: [email protected]
Subject: RE: How to debug SA in eclipse


Hi,

sorry to bother you again 
I was wondering if there is any mvn command that will help in migration 
i am usind maven 
I mean are there any steps that allows servicemix to import to eclipse

so
that i can see whats going on inside jbi?
Regards,
Raj



Zhurakousky, Oleg wrote:

    
        

Here it is again:
http://open.iona.com/wiki/display/ProdInfo/FUSE+Eclipse+Tools

Once you go through the steps in the link above all the necessary
plug-ins will be installed.


To configure a server (make sure you go through steps above first): 
1. Open up a Server View inside of Eclipse --> Right Click anywhere in

the view --> New --> Server --> Apache --> SrviceMix and follow the
directions.
2. Once done you'll see two options "Start" or "Start in debug". If
server is started in debug mode, and breakpoints are setup in your SUs
the debugger will stop at breakpoints

You might also want to read some of the Eclipse documentation on how

      
          

to

    
        

setup various Eclipse environments since the process I described above
is not any different then setting up for JBoss, Fuse, BEA, Wewbsphere

      
          

or

    
        

any other server.

oleg  


-----Original Message-----

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Thursday, October 04, 2007 10:20 AM

To: [email protected]
Subject: RE: How to debug SA in eclipse


Hi,
I set up debugger to let it know where to stop
I am following this docs
http://incubator.apache.org/servicemix/building.html


      
          

http://incubator.apache.org/servicemix/importing-servicemix-into-eclipse

    
        

.html
I did mvn install and mvn eclipse and did build using mvn
jbi:projectDeploy

I don't know how to start servicemix from within eclipse 
the link that you pasted last one is not opening 
so can you send it again 


I am starting servicemix 3.2 form commandline i mean using
<SERVICEMIX_HOME>bin\servicemix
Please let me know more about starting from within eclipse and how do

      
          

i

    
        

migrate the correct way to eclipse to see how is everything going on 
I deployed my project using mvn jbi:projectDeploy command and putting

the
jar in project directory.
everything is working fine but i just can't see the whole control

      
          

within

    
        

NMR

I hope this time I clearified you 
So please let me know if you don't understand this explanation i will

try to
elaborate
Regards,
Raj

Zhurakousky, Oleg wrote:

      
          

Sorry, but I still don't understand. 
1. Did you set the breakpoint to let debugger know where to stop?

2. In your previous post you said: ". . . set up everything as the

        
            

doc

    
        

says". What doc you are referring to? Is it this one?


        
            

http://open.iona.com/wiki/display/ProdInfo/FUSE+Eclipse+Tools?focusedCom

    
        

mentId=1081394#comment-1081394
3. Did you configure ServiceMix or Fuse server in Eclipse?
4. Did you start ServiceMix or Fuse server within the Eclipse
environemnt?

To debug NMR exchanges or any other SerbiceMix code all you have to

        
            

do

    
        

is Attach Sources, which is part of Eclipse standard debug feature

        
            

and

    
        

not ServiceMix specific.
See this:


        
            

http://www.google.com/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen

    
        

-US%3Aofficial&hs=KL6&q=Debugging+in+Eclipse&btnG=Search
 Oleg

-----Original Message-----

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Thursday, October 04, 2007 9:40 AM

To: [email protected]
Subject: RE: How to debug SA in eclipse


Yes.I moved the project to eclipse

I could see the queue through the JMX console 
and could trace everyhting in by client code that sends messge to the
queue 
jms consumer consumes it and bean listens to the NMR and echos it 
but in remote debugger of the eclipse never shows the control to the

onMessage method of the servicemix bean
Please help me with this if you have done it.
Regards,
Yogaraj

Zhurakousky, Oleg wrote:

        
            

Do you mean you set the breakpoint in your bean and it doesn't stop

          
              

at

      
          

breakpoint?

-----Original Message-----

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] 
Sent: Thursday, October 04, 2007 9:16 AM

To: [email protected]
Subject: How to debug SA in eclipse


hi,
I made tow SU servicemix bean and jms consumer and its working.
I want to debug the project in eclipse and I set up everything as

          
              

the

    
        

docs
says.
But the problem is the debugg workflow doesn't go through the bean.
I mean I can see my jms client program steps puhsing the message to

          
              

the

        
            

queue and echo back form bean in inout exchage.
Can we trace the NMR flow in the eclipse too or is it something that
happens
internally.
Regards,
Yogaraj
--
View this message in context:


          
              

http://www.nabble.com/How-to-debug-SA-in-eclipse-tf4568770s12049.html#a1

    
        

3039678
Sent from the ServiceMix - User mailing list archive at Nabble.com.




          
              

--
View this message in context:


        
            

http://www.nabble.com/How-to-debug-SA-in-eclipse-tf4568770s12049.html#a1

    
        

3040094
Sent from the ServiceMix - User mailing list archive at Nabble.com.




        
            

--
View this message in context:


      
          

http://www.nabble.com/How-to-debug-SA-in-eclipse-tf4568770s12049.html#a1

    
        

3040880
Sent from the ServiceMix - User mailing list archive at Nabble.com.




      
          

--
View this message in context:
http://www.nabble.com/How-to-debug-SA-in-eclipse-tf4568770s12049.html#a1
3045823
Sent from the ServiceMix - User mailing list archive at Nabble.com.




    
        

  
      



    



  

























					Reply via email to