Martin,
I would suggest you back up a step and try getting your rewrites to
work without SSL. That's what I had to the first time around. But first a
couple of clarifications as I know them...
You will always redirect to the Zope ports...Plone isn't and doesn't serve web
pages...you MUST have Zope (and it's webserver) installed in order to use
Plone... In the case of Plone sites, you request that Zope serve that directory
up to you.
I would strongly suggest you use some kind of "domain name"...even it's just
the workstation name. You can always create an entry in your Host file to
connect to it from another workstation (especially if you are using not routing
IP's - e.g., 192.168.x.x or 10.10.x.x)
Speaking of routers...I would try and stay local lan for now if you can...all
of our web servers are behind redundant load balancers, behind a core switch,
behind a firewall...but we've got network techs to set everything up! :)
Going back to SSL...I'm working on a new copy of your http.conf file that you
can test and will send shortly...I'm removing / commenting out all of the SSL
stuff to get the rewrites to work before adding the SSL layer of complexity.
One thing that jumps out at me, and I know I had troubles with, is the order
that things are listed in your conf file. Note in my copy that I sent you, the
very last thing is the include for my ssl.conf file...that comes AFTER all of
my rewrite rules etc.
Finally, start with a Plone site in your Zope instance to keep things less
confusing...look in the http file I'm sending you for my comments.
Joe Marshall
BSA Software Specialist
www.geiger.com
www.farmersalmanac.com
www.crestline.com
Helpdesk 207-755-2510
[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin Malek
Sent: Sunday, August 06, 2006 12:57 PM
To: [email protected]
Subject: [Setup] Re: Re: Re: Can't get Plone+Apache SSL to work
Hello again
Ok now some progress :)
Even though I am not able to have anything else as a VirtualHost than *.443 I
come one step closer when I set NameVirtualHost the same as VirtualHost. I get
the "It works" page after logging in with ssl. But as soon as I turn on my
rewrite rules I get the "forbidden access" page.
My rewrite rule is:
RewriteRule ^/(.*)
http://localhost:8081/VirtualHostBase/https/81.26.252.160:443/VirtualHostRoot/$1
[L,P]
Btw should I rewrite the zope port or the plone port? I want plone to show but
the VirtualHostMonster is on zope. I don't qutie get it.
My guess is that I'm pointing somewhere where the VirtualHostMonster can't be
found.
Thanks,
Martin Malek
"KE Liew" <[EMAIL PROTECTED]> skrev i
meddelandet
news:[EMAIL PROTECTED]
> Double check that the NameVirtualHost and VirtualHost have the same
> values. :)
>
_______________________________________________
Setup mailing list
[email protected]
http://lists.plone.org/mailman/listinfo/setup
_______________________________________________
Setup mailing list
[email protected]
http://lists.plone.org/mailman/listinfo/setup
