Since the installer has inputted into the registry had you thought of doing a network copy of the good copy of the program file plone folder. I've had no problems running that operation successfully. That's a cheap way if you have a network.
On May 21, 4:03 am, Bet Arki <[EMAIL PROTECTED]> wrote: > Hi > I tried to install plone 2.5.3 (inc ZOPE 2.9.7 and Python 2.4.4) on a > windows XP machine. The first few time s it extracted all files and the > fell over whilst trying to build an instance of plone - message...... > pythonw.exe - Unable to locate component. This application has failed to > start because python22.dll was not found. Reinstalling the application may > fix the problem. > I tried several times - but always the same. > > I then used the same download on another (identical build?) XP machine - all > went ok and plone runs. I did note that the post install logs were very > different on both. I also noticed that the log on the failed install was > dated from the first attempt (ie had not overwritten). So then I used > windows control panel to de-install both plone and python. I also stopped > any programs in startup that may heve been trying to use sockets or ports > (MSN messanger, WISEftp manager). > > Now I seem to be worse off. If I reinstall from the download, the installer > extracts all the files - but then does not attempt to build an instance of > plone. The installer says that the installation is complete and all is ok - > BUT plone does not run and there is NO postinstall log file. > > Any help will be most welcome > Cheers > Bet > -- > View this message in > context:http://www.nabble.com/Plone-2.5.3-Installation-Failure-tf3789041s1548... > Sent from the Installation & Setup mailing list archive at Nabble.com. > > _______________________________________________ > Setup mailing list > [EMAIL PROTECTED]://lists.plone.org/mailman/listinfo/setup _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
