Hmmm, Your ZEO is not running, fix that and 'plonectl client fg' should work… To fix ZEO, try 'plonectl zeoserver fg' and look for errors…
HTH, Alex On 2009-05-27, DownNotAcross <[email protected]> wrote: > > This keeps getting more and more twisted, and I hope this post actually makes > it through the convoluted process of getting subscribed to the mailing list > via the forum... > > Anyway, I have an older server running Plone 2.5.2. I need to migrate the > data from this server to a new server running 3.2.2. The OS is CentOS 5.2. > > I attempted following the instructions posted here: > http://plone.org/documentation/how-to/move-site - first off, I had to take > the contents of "products" out of the way as that was confusing things even > further. So, working with just Data.fs, I did the following: > > 1) Rename the "out of the box" Data.fs to Data.fs.orig. > 2) Copy the Data.fs from the old server in its place. > 3) Confirm permissions and ownerships are the same as for original Data.fs > 4) plonectl start. > > After step 4, I'm unable to connect and get a 502 proxy error. Tried > starting in debug mode as: > > plonectl stop > plonectl zeoserver start > plonectl client1 fg > > I noted that zeoserver started, and upon grep'ing for the PID that was > reported when it started, I see that it's running. buildout.cfg has it on > port 8100. If I do lsof -i:8100, there is NOTHING running on that port. > The debug output from client1 is below: > > 1. > # ./plonectl client1 fg > 2. > client1: /usr/local/Plone/zeocluster/parts/client1/bin/runzope -X > debug-mode=on > 3. > 2009-05-27 14:59:08 INFO ZServer HTTP server started at Wed May 27 > 14:59:08 2009 > 4. > Hostname: 0.0.0.0 > 5. > Port: 8080 > 6. > 2009-05-27 14:59:08 INFO Zope Set effective user to "plone" > 7. > 2009-05-27 14:59:11 INFO Marshall libxml2-python not available. Unable > to register libxml2 based marshallers. > 8. > 2009-05-27 14:59:15 INFO ZEO.ClientStorage (3062) ClientStorage > (pid=3062) created RW/normal for storage: '1' > 9. > 2009-05-27 14:59:15 INFO ZEO.cache created temporary cache file > '<fdopen>' > 10. > 2009-05-27 14:59:15 WARNING ZEO.zrpc (3062) CW: error connecting to > ('127.0.0.1', 8100): ECONNREFUSED > 11. > 2009-05-27 14:59:20 WARNING ZEO.zrpc (3062) CW: error connecting to > ('127.0.0.1', 8100): ECONNREFUSED > 12. > 2009-05-27 14:59:30 WARNING ZEO.zrpc (3062) CW: error connecting to > ('127.0.0.1', 8100): ECONNREFUSED > 13. > 2009-05-27 14:59:50 WARNING ZEO.zrpc (3062) CW: error connecting to > ('127.0.0.1', 8100): ECONNREFUSED > > > ... and so on. > > If I move the old Data.fs (the "out of the box" clean install one) back into > place, it starts fine without any errors. > > I'm completely lost and also completely new to this monster known as > Plone... any help would be greatly appreciated. > > Thanks > -- Alex Clark · http://aclark.net Buy Practical Plone 3: http://tinyurl.com/practical-plone _______________________________________________ Setup mailing list [email protected] http://lists.plone.org/mailman/listinfo/setup
