I think that is NetVirt classifier issue, in sfc103 demo, we have on SF use case. In your case, you must have two classifiers, one is in compute1, another is in compute2, for compute1, I think you have enabled NetVirt to send back the packet to the client, but for compute2, NetVirt can't support this, right? Classifier2 must have VxLAN-gpe port for this in compute2.
From: Manuel Buil [mailto:[email protected]] Sent: Wednesday, November 23, 2016 1:12 AM To: Yang, Yi Y <[email protected]> Cc: [email protected]; Georgios Paraskevopoulos ([email protected]) <[email protected]> Subject: Potential bug in NSH patch for OVS Hi Yi Yang, I am observing that sometimes our SFC OPNFV test case fails. I am trying to investigate why and I think I found the problem. ### SET-UP ### The environment is the following: the http traffic from client gets classified and assigned to a chain with one SF. After the traffic visits that SF, the SFC encapsulation is removed and the packet is sent to the netvirt pipeline. The scenario that fails is the following: client and SF are in compute1, the server is in compute2. ### PROBLEM ### All the SFC process happens in one OVS because both classifier and SF are in that OVS. Then the packet leaves SFC pipeline and gets into Netvirt pipeline which egress the packet using the vxlan tunnel it has to connect to the compute2. The problem is that instead of using udp port 4789 as it should, it uses udp port 6633. Compute2 has no SFC service so there is no vxlan port listening on udp port 6633 and thus the packet is dropped. I captured the packet using ovs-dpctl and everything is correct except the tp_dst which is 6633 even though it should be 4789: recirc_id(0),nsh(nsi=254,nsp=3c,nsh_mdtype=1,nsh_np=3,nshc1=c0a80006,nshc2=12),tunnel(tun_id=0x3c,src=11.0.0.6,dst=10.20.0.11,vxlan(gpe(np=0x3c)),flags(-df+csum+key)),in_port(8),skb_mark(0),eth(src=fa:16:3e:6b:08:c7,dst=fa:16:3e:4a:be:0e),eth_type(0x0800),ipv4(dst=11.0.0.4/255.255.255.254,tos=0/0x3,frag=no), packets:0, bytes:0, used:never, actions:set(tunnel(tun_id=0x12,src=192.168.2.4,dst=192.168.2.3,ttl=64,tp_src=49676,tp_dst=6633,vxlan(gpe(np=0x4,flags=0)),flags(df|csum|key))),pop_nsh,4 These are the ports (you can see that it egresses on 4 ==> vxlan_sys_4789): port 0: ovs-system (internal) port 1: br-ex (internal) port 2: p_aec4d661-0 (internal) port 3: br-int (internal) port 4: vxlan_sys_4789 (vxlan) port 5: tapbbd70ea7-7b port 6: tapd5cbb645-01 port 7: tap3f9a7479-51 port 8: vxlan_sys_6633 (vxlan) If I sniff the packets, I can see that all the traffic coming from compute1 and going to compute2 is sent through vxlan and udp port 4789, except for the packets that traversed SFC, which are sent with port 6633: 16:30:45.508076 IP 192.168.2.4.60213 > 192.168.2.3.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 99: openflow:119801980855940 16:30:45.508288 IP 192.168.2.3.36551 > 192.168.2.4.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 97: openflow:93452943833469 16:30:46.356412 IP 192.168.2.4.52024 > 192.168.2.3.6633: VXLAN, flags [I] (0x08), vni 18 IP 11.0.0.4.38652 > 11.0.0.5.http: Flags [S], seq 340357625, win 28200, options [mss 1410,sackOK,TS val 561484 ecr 0,nop,wscale 7], length 0 16:30:46.356679 IP 192.168.2.3 > 192.168.2.4: ICMP 192.168.2.3 udp port 6633 unreachable, length 118 16:30:47.354970 IP 192.168.2.4.52024 > 192.168.2.3.6633: VXLAN, flags [I] (0x08), vni 18 IP 11.0.0.4.38652 > 11.0.0.5.http: Flags [S], seq 340357625, win 28200, options [mss 1410,sackOK,TS val 561734 ecr 0,nop,wscale 7], length 0 16:31:20.508294 IP 192.168.2.3.36551 > 192.168.2.4.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 97: openflow:93452943833469 16:31:20.509431 IP 192.168.2.4.60213 > 192.168.2.3.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 99: openflow:119801980855940 16:31:25.507641 IP 192.168.2.3.36551 > 192.168.2.4.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 97: openflow:93452943833469 16:31:25.507728 IP 192.168.2.4.60213 > 192.168.2.3.4789: VXLAN, flags [I] (0x08), vni 0 LLDP, length 99: openflow:119801980855940 Can you investigate if this problem might be related to your NSH patch for OVS? Perhaps packets that traverse the SFC pipeline have L4 port destination hardcoded as 6633? Thanks, Manuel
_______________________________________________ sfc-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/sfc-dev
