I cannot get the DHCP client to work wtih a Cisco 675 DSL router. I have tried it on two different setups. The first, the Cisco is on PPP mode with NAT acting as a DHCP server. The STN 2.1 box does not get an IP address from the DHCP server. Windows 95 and Windows NT clients do. If I assign a 10.0.0.x IP address to the STN box and show 10.0.0.1 as the gateway, it works, although there is not much point to using that setup as the Cisco does virtually everyting STN does when the Cisco is in PPP + NAT mode. The second setup I tried was a Cisco 675 in bridging mode where the ISP provides DHCP. Again, the STN box does not get an IP address but a Windows NT client attached to the Cisco does. As the Cisco in this setup does no NAT and provides no security, this is an ideal application for STN, but I have to get the DHCP client working. Any ideas? Rick Samuels _______________________________________________ ShareTheNet maillist - [EMAIL PROTECTED] http://www.webserv.com/mailman/listinfo/sharethenet
