|
What
is the IP address of the client that you're using to ping the STN
box?
Are you sure your cable modem has the IP address
192.168.88.254? This is not how cable modems typically work.
Normally, the cable modem is a passthrough device, and the cable service
provider gives you a static IP address/gateway/etc, or they tell you to use
DHCP.
When
the cable company came out, what were the settings that they used to set up the
single client that the cable modem was plugged directly
into?
Regards,
John
Hi there
This little nice piece of software was just
what I have been looking so I couldn't wait to try it out.
I made a disk for my machine with a cable modem
and two ethernet cards 1. PCI NE 2000 comp. and 1. ISA NE 2000.
I use 192.168.0.1 255.255.255.0 and
name svr. 192.168.0.1 on the network card (The
PCI one)
and 192.168.88.193
255.255.255.0 gateway 192.168.88.254 on the internet
card
when the STN machine has finished booting the
screen shows "Share the net vers. 2.11" and the screen
freezes (Is this right)
But all in all I can't connect to the machine
from my clients, and can't even ping it.
Am I missing something or is this a typpical
Netcard problem ???
Thanks in advance
Farouche
|
