I am replying to myself and to all those who may be interested. I hadn't noticed that the most recent version 2.1.3 was available. I downloaded this and it solved my internet connection that seemed to problematic under 2.1.0. After Starting S50dhcpcd.... An external ip address is displayed, and I connect to the net. On should note, that if using a 3Com509 card, I couldn't get this card to recognize (as it was in 2.0.5 using irq10 and io 0x300) unless I set the irq to AutoIRQ and had to leave the BaseAddress empty. Filling in the actual info as under 2.0.5 of irq 10 and BaseAddress 0x300 forced the card not to be recognized, ie, just skipped during the boot. Yet my internal NE2000 compatible card worked just fine with the IRQ filled in at 11 and the BaseAddress filled in at 340. Thanks for fixing the program. I look forward to using the newer interface and hope to be able to move forward using the other new features. Sincerely, ARnie _______________________________________________ ShareTheNet maillist - [EMAIL PROTECTED] http://www.webserv.com/mailman/listinfo/sharethenet
