I have also experienced this problem using Netscape under Windoze. I have discovered that if I "reload" the page and say yes to repost data, that it usually works. Oddly enough, I sometimes have to reload it several times, but it has always worked eventually. Hope this helps. Dave > -----Original Message----- > Date: Sun, 29 Aug 1999 03:33:02 -0700 > From: "Richard G. Samuels" <[EMAIL PROTECTED]> > To: Share The Net <[EMAIL PROTECTED]> > Subject: [ShareTheNet] Problem setting up inbound HTTP > > Using the Web based admin on 2.1.2, I tried to set up inbound HTTP. When > I enable inbound HTTP and put in the ip address (10.0.0.225) and select > "OK" it gives the message: "Content-type: text/html CONTENT_TYPE must be > set for CGI" and the change does not take. I tried doing this as a User > Specified Inbound Service on port 80 and got the same message. > > Help. > > --__--__-- > > Message: 2 > Date: Sun, 29 Aug 1999 03:42:06 -0700 > From: "Richard G. Samuels" <[EMAIL PROTECTED]> > To: Share The Net <[EMAIL PROTECTED]> > Subject: [ShareTheNet] More problems with remote administration > > I sent a previous mesasge about enabling inbound HTTP with remote > administration. It turns out that any command I try to send from remote > administration gives the same message: "Content-type: text/html > CONTENT_TYPE must be set for CGI" > > (remainder truncated for brevity) _______________________________________________ ShareTheNet maillist - [EMAIL PROTECTED] http://www.webserv.com/mailman/listinfo/sharethenet
