David, You say you have been running over a year with STN. Did you recently upgrade to 2.13. The reason I ask is that when I ran 2.0.5, I was able to specify the IRQ and IOBase for the 3Com NICS and they were found and initialized. But with 2.1.+ I needed to leave the IOBase empty and set the IRQ to auto, otherwise they were not found. Loading syslog.tbz... Starting S01nic..... (here is where the NIC probe and found message should appear) eth0 eth1: 3C509 at Thought this might help. Arnie _______________________________________________ ShareTheNet maillist - [EMAIL PROTECTED] http://www.webserv.com/mailman/listinfo/sharethenet
