Strange problem here... My Daytona is popping up an error 13. Map sensor problem. Seems to be BARO related, as I put a meter on the baro solenoid, and it never dips. Seems like the problem happens right when the computer would be checking the baro. Start it up, run for a minute, maybe less, and then the computer triggers the error and the light comes on. I know I should get a code 37 not a 13 with a baro problem, but the map sensor is reading just fine. I can backprobe the pins on the SMEC connector. The map sensor voltage is exactly what it should be. And the baro voltage never drops like it should when the computer checks, not even when first turning on the key. Suggestions? Or just tell me like it is.. It's a smoked transistor on the SMEC and that SMEC is dead unless I can miraculously figure out which one it is.
-- Brian J. Schulteis Bremerton, Washington '85 Shelby Charger (resto project 25% done) '88 Chrysler Lebarron Convertible (J body) '88 Daytona Pacifica (Intercooled 2.5L daily driver) -----------------------REMOVE-FOOTER-WHEN-REPLYING---------------------------- Questions? Visit http://www.sdml.org/ To be removed, visit http://www.sdml.org/pages/leave.html