1st and foremost- I have an AWESOME set of wheels- They are 15x8 Revolution 3-piece race wheels. They are pretty light, and they are the proper offset to fit ALL turbo Dodges, even L-bodies! (but you will have to roll the fender lips in the rear or they might rub if you hit bumps...). These wheels are a thick five-spoke pattern with silver painted spokes. They are currently wearing Toyo race tires (but the tires are dead). I will NOT remove the tires however, because if I ship them, the tires will help protect them (trust me, it's worth the extra shipping cost). I would assume shipping to run anywhere from $50 to $150 depending on where they go. I am asking $800 for the set. They were almost double that new, if you could get them anymore, which you can't...
This is what they look like roughly, but they are 3 piece so they have bolts running around the circumference inside the rim. http://www.sspmotorsports.com/sale15x9rfxa.JPG Other new things I've come across now for sale- T2 turbo- ran fine when on car, but feels a little, um, wiggly. has 2.5 wastegate housing- $100 Brand new Energy Suspension poly bushings for L-body front a-arms.- $20 Flexi- airbox to turbo hose with MONSTER air filter on it (12" long, 6" diameter to 5" diameter cone)- $25 Smooth airbox to turbo hose with shrouded filter (small cone with plastic cover- good for cold air/ ram air setup)- $25 Ported T2 exhaust manifold- missing one turbo stud (hole stripped) but worked fine for me with only 3- $50 Late silver TURBO valvecover with 1-piece gasket- $40 Late black TURBO valvecover with 1-piece gasket- $50 Old stuff still for sale- Bottom end stuff- Early T2 block- $50 (may even be a free gift if you buy something and pick it up!) *Lightened* and knife edged forged crank for early block- $250 NEW .020 over Venolia forged pistons w/ pins- $350 T2 rods- need redone- come with NEW ARP bolts- $100 Windage tray oil pan- custom made- $150 Also have LOTS of misc bolts, pulleys, housings, etc. Contact me with needs. Late t1 head setups- very used- with manifolds and turbos- make offers Full cage for 2dr L-body- bolt-in SCCA legal with door bars- $500 T3 complete engine with knock- $700 I'm sure there will be more... ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
