Driveshaft shop makes great axles but not needed in an L body unless you plan to make well over 400hp. For the A555 conversion use '90 Omni axles, they will be the correct length for a GLH an dthe larger spline for the A555. If you still want to keep equal lenth use two drivers side axles and get the intermediate shaft out of a A555/A520 car. There is a thread or two at www.turbo-mopar.com on this subject.
JT ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 26 Aug 2008 09:19:03 -0400 > From: Edward Mazurek <[EMAIL PROTECTED]> > Subject: SD> Need AGLH sized axles for 555 tranny > To: "[email protected]" <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi everyone, > > I'm ramping up to get my GLH-T going again and I have a 555 that > I want to install in it. I need axles however. I know I can use > the 89 (or is it 90?) Omni axles but I'd like to get the beefier > cut down daytona axles. Is there a source for these? > > Thanks, > > Ed ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
