I did this on my T850 in my SRT, and it looks great. However, it is a lot of work. Trans will need to be completely disassembled, covering all sensitive areas (like bearing races) real well, and then bead blast it. The you will need silicone plugs to protect all threaded areas from the powder. Then of course powder coating. We used a 3x3x3' oven with a hanging rack to coat my case. Not sure if it would fit in a standard oven.
On 13 Feb 2009 at 10:48, Edward Mazurek wrote: Hi, I saw that someone powdercoated a tranny. I was thinking of doing the same. I suppose it would need to be disassembled first and then bead blasted? Anyone have experience with this? I just have a regular electric oven I powdercoat in. I think the pieces will all fit. Anyone? Thanks, Ed ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge Neil V. Emiro ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
