Updated. Sold items removed, one or two things added. Some prices went down.
I will be away from Thursday (7/30) till Monday (8/10). I will have sporadic email access. Please respond using this title or DODGE PARTS in the title of your email. Whatever isn't gone by 8/12 goes to eBay... Items for sale, all must go. Make offers... All items in Boyertown, PA 19512 Big stuff, prefer not to ship--------------------------- Blue/silver seats from 84 Shelby Charger. Nice condition overall, logos are good. $150- SALE PENDING? Ground effects for 87 GLHS/Shelby Charger- Good condition, no tears/cracks, black paint in very nice condition. $125 Roll cage for Shelby Charger- Kirk Racing 6 point, SCCA legal. Bolt in and go. $500 Spirit R/T brakes- all 4 corners- calipers, uprights (hubs/knuckles), discs, master cylinder, some hardware- $100- SALE PENDING? One head with one-piece intake, exhaust, and Mitsu turbo- no cam and followers- $100 One head with one-piece intake and exhaust- $100 Smaller items, will ship------------------------------ Crank pulley for early 2.2 w/ no A/C- two V belt groves (not for multi-rib belt from 84/85 on up)- $5 Block heater- freeze plug style, from Mopar- $5 Cast turbo oil return and oil feed line- $10 Lightened forged crank for early turbo 2.2- weighs just over cast crank weight- needs some touch-up work, should be balanced when done- $125 Stock 8-bolt flywheel with approx. 1 lb removed from outer ring (bevel cut inside)- $20 Stock clutches, used- one LUK, one Sachs- $anything? Newer style o-ringed "TURBO" valve covers- one silver, one black- dirty but good- $20 each? Late turbo airbox with BOV in it- $20 Brake pads to fit Charger/Omni NON SHELBY- Porterfield R4E pads (endurance full-race pads)- NEW- $75 (cost $175) And finally------------------------- Prototype M"squared" Racing turbo header- stainless tube header, places turbo in stock location- never run- must use small starter- $500, will include starter for $50 I also have enough hardware to build one more head- a swirl style. 1mm o/s valves, better springs, port work. If you are interested, talk to me. I also can wrangle a one-piece intake and exhaust if you need them. I also have LOTS of small wiring and hardware bits lying around from 15 years of turbo-Dodge work. Ask me if you need something, and make a fair offer. It'll probably be yours. Again, I'm VERY serious about getting rid of this stuff. Don't try to kill me on things, but I will entertain serious offers. Some pics available. Serious inquiries please. PayPal preferred, but will accept money order. ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
