hi,
what you did was to change the bluetooth module's uart to run at 9600.
the problem is that i see no mention of you changing the mcu's uart that
communicates with the bt module to run at the same speed.
you'll have to modify the uart setup in the bt driver
(rovingnetworksp.nc under shimmer/chips) to 9600 baud.
good luck,
steve
On 07/12/2012 10:53 AM, Vitor Pinheiro wrote:
Hi guys,
I tried to use the command:
call Bluetooth.setBaudrate("9600");
And my mote doesn't turn bluetooth on anymore...Even after being
recompiled and also taking the command out to not change the baud
rate... And it still doesn't turn BT on again...
Did I use the command correctly? What to do to put it working again?
Cheers,
--
V.GilVitorino
_______________________________________________
Shimmer-users mailing list
[email protected]
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
_______________________________________________
Shimmer-users mailing list
[email protected]
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
