On Wed, Feb 27, 2013 at 9:28 AM, Yared Berhanu <[email protected]> wrote:
> Greetings all, > > I am new member and it my first time to post on this mailing list. My > problem is, I want to install blip on shimmer2r devices and I have > downloaded the recent tinyos-main and tinyos-2.x-contrib OS using svn from > goodlecode repo. The SVN repository at Google has been Deprecated. You want to get the current release from https://github.com/tinyos/tinyos-release and the development tree from https://github.com/tinyos/tinyos-main. Blip 2.0 has been added to the trunk. But changes were made prior to the 2.1.2 release that removed support/sdk/c/blip/lib6lowpan/devconf.h And the developer seems to be no longer active. I'm not sure what to tell you. I've CC'd others to see if they might no of anything. > I have followed all the steps on the tinyos wiki for installation but I > could go through it, here were the command I used to compile and the error > I found > > tiny2@tiny1:~/tinyos-main/tinyos-2.x-contrib/berkeley/blip-2.0/apps/IPBaseStation$ > make shimmer2r blip install bsl,/dev/ttyUSB0 > mkdir -p build/shimmer2r > compiling BaseStationC to a shimmer2r binary > ncc -o build/shimmer2r/main.exe -Os -O -DCC2420_HW_ACKNOWLEDGEMENTS > -DCC2420_HW_ACKNOWLEDGEMENTS -DCC2420_HW_ADDRESS_RECOGNITION -DPACKET_LINK > -DTOSH_DATA_LENGTH=125 -I/home/tiny2/tinyos-main/tos/lib/net/ > -I/home/tiny2/tinyos-main/tos/lib/printf/ > -I/home/tiny2/tinyos-main/support/sdk/c/blip/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/interfaces/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/nwprog/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/shell/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/serial/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/platform/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/icmp/ > -I/home/tiny2/tinyos-main/tos/lib/net/blip/dhcp/ > /home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/iovec.c > /home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/in_cksum.c > /home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/ip_malloc.c > /home/tiny2/tinyos-main/support/sdk/c/blip/lib6lowpan/utility.c > /home/tiny2/tinyos-main/tos/lib/net/blip/table.c -mdisable-hwmul > -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=shimmer2r > -fnesc-cfile=build/shimmer2r/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22 > -DCC2420_DEF_CHANNEL=15 -DPACKET_LINK > -I/home/tiny2/tinyos-main/support/sdk/c/blip/interface > -I/home/tiny2/tinyos-main/tos/lib/serial -DIDENT_APPNAME=\"BaseStationC\" > -DIDENT_USERNAME=\"tiny2\" -DIDENT_HOSTNAME=\"tiny1\" > -DIDENT_USERHASH=0x543ca1f9L -DIDENT_TIMESTAMP=0x512e41afL > -DIDENT_UIDHASH=0x8d39b1c1L BaseStationC.nc -lm > BaseStationC.nc:88:21: error: devconf.h: No such file or directory > BaseStationP.nc:72:21: error: devconf.h: No such file or directory > In file included from BaseStationC.nc:100: > In component `BaseStationP': > BaseStationP.nc: In function `SerialControl.startDone': > BaseStationP.nc:192: `config_reply_t' undeclared (first use in this > function) > BaseStationP.nc:192: (Each undeclared identifier is reported only once > BaseStationP.nc:192: for each function it appears in.) > BaseStationP.nc:192: `reply' undeclared (first use in this function) > BaseStationP.nc:199: syntax error before `)' > BaseStationP.nc:202: `CONFIG_ERROR_BOOTED' undeclared (first use in this > function) > BaseStationP.nc: In function `ConfigureReceive.receive': > BaseStationP.nc:375: `config_cmd_t' undeclared (first use in this function) > BaseStationP.nc: In function `doConfigure.runTask': > BaseStationP.nc:386: `config_cmd_t' undeclared (first use in this function) > BaseStationP.nc:386: `cmd' undeclared (first use in this function) > BaseStationP.nc:387: syntax error before `error' > BaseStationP.nc:388: `config_reply_t' undeclared (first use in this > function) > BaseStationP.nc:388: `reply' undeclared (first use in this function) > BaseStationP.nc:388: syntax error before `)' > BaseStationP.nc:390: syntax error before `)' > BaseStationP.nc:393: `CONFIG_ECHO' undeclared (first use in this function) > BaseStationP.nc:393: case label does not reduce to an integer constant > BaseStationP.nc:395: `CONFIG_SET_PARM' undeclared (first use in this > function) > BaseStationP.nc:395: case label does not reduce to an integer constant > BaseStationP.nc:406: `CONFIG_REBOOT' undeclared (first use in this > function) > BaseStationP.nc:406: case label does not reduce to an integer constant > BaseStationP.nc:409: `CONFIG_KEEPALIVE' undeclared (first use in this > function) > BaseStationP.nc:409: case label does not reduce to an integer constant > BaseStationP.nc:413: `error' undeclared (first use in this function) > BaseStationP.nc: In function `configureReply.runTask': > BaseStationP.nc:424: `config_reply_t' undeclared (first use in this > function) > BaseStationP.nc:424: `reply' undeclared (first use in this function) > BaseStationP.nc:427: syntax error before `)' > BaseStationP.nc: In function `ConfigureTimer.fired': > BaseStationP.nc:453: `config_reply_t' undeclared (first use in this > function) > /home/tiny2/tinyos-main/tos/chips/cc2420/lpl/DummyLplC.nc:39:2: warning: > #warning "*** LOW POWER COMMUNICATIONS DISABLED ***" > /home/tiny2/tinyos-main/tos/chips/cc2420/link/PacketLinkC.nc:38:2: > warning: #warning "*** USING PACKET LINK LAYER" > Reset.h:56:2: error: #error "Reset.h not defined/supported for your > platform, aborting..." > make: *** [exe0] Error 1 > > > Could you help me please, > > Sincerely, > > -- > Yared Berhanu Woldegiorgis > Økern torgvei 92 > N-0589 Oslo, Norway > tel. 004746263024 > [email protected] > > > _______________________________________________ > Shimmer-users mailing list > [email protected] > https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users > > -- Eric B. Decker Senior (over 50 :-) Researcher
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
