Hi Andre, If you take a look at the comment at the comment at the start of SimpleAccelC.nc, you will notice that this application transmits the data over Bluetooth, not the 802.15.4 radio (as used byt the Span). So to make use of the simpleAccel.py script you will need to pair the shimmer with your PC and use the Bluetooth serial port.
Take a look at SimpleAccelGyro for an 802.15.4 example (and so will communicate with a Span running BaseStation): http://tinyos.cvs.sourceforge.net/viewvc/tinyos/tinyos-2.x-contrib/shimmer/apps/SimpleAccelGyro/ Mike On Sun, Mar 3, 2013 at 9:19 PM, Andre Hoffmeyer <[email protected]>wrote: > Hi Mike, > > thanks for help. You were right. My code base was totally outdated. Now I > updated everything and it works fine. Perhaps you can help me further. > > I did the following step. (I use a mac and the vmwarefusion player for > developing) > > I installed the tinyos-main/apps/BaseStation on my your span > it works. > > Then I installed tinyos-2.x-contrib/shimmer/apps/SimpleAccel > it works too. > > After that I pointed out the simpleAccel.py script with the serial port > from the span but nothing happened. I saw nothing at the console. > > Do you have any ideas? > > Best regards, > > Andre > > Hi Andre, > > Firstly the Googlecode SVN repository is now deprecated. The home for the > currently active development tree is Github: > https://github.com/tinyos/tinyos-main > It is probably worth changing to this. > > Most likely your problem is with the version of msp430-gcc that you are > using. To check this type "msp430-gcc -v" at the command line. I suspect > you are still using version 4.3.3. You will need to upgrade to version > 4.6.3. > > The easiest way to do this is probably to use the debian packages: > http://tinyprod.net/debian-dev/README-46.html (not sure if these are the > latest instructions, but Eric should be able to correct me if not). > > See here for some more info: > http://www.mail-archive.com/[email protected]/msg00411.html > > Mike > > > > On Wed, Feb 27, 2013 at 7:40 AM, Andre Hoffmeyer > <[email protected]>wrote: > >> I use the tinyOS version that i bought with the shimmer sensor. Before I >> started to use it I update (cvs update and svn update) all source trees. Is >> there a possibility to check the version in the console? >> >> >> -------- Original-Nachricht -------- >> > Datum: Tue, 26 Feb 2013 16:28:56 -0800 >> > Von: Eric Decker <[email protected]> >> > An: Andre Hoffmeyer <[email protected]> >> > CC: [email protected] >> > Betreff: Re: [Shimmer-users] problems to make/install a program >> >> > What version of TinyOS do you have installed? Where did you get it? >> > >> > What msp430 toolchain are you using? >> > >> > >> > >> > On Tue, Feb 26, 2013 at 12:26 PM, Andre Hoffmeyer >> > <[email protected]>wrote: >> > >> > > Hi at all, >> > > >> > > I just started programming shimmer sensors and i have a little problem >> > > what I think for you it is easy to solve. >> > > >> > > I use the vmware player and the shimmer tiny2 development environment. >> > > >> > > If I want to make or install the >> > > tinyos-2.x-contrib/shimmer/apps/SimpleAccelGyro I get this error and I >> > > don't know why. >> > > >> > > In component `HplMsp430Usart1C': >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc: At >> > top >> > > level: >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc:91: >> > > cannot find `SIMO1' >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc:92: >> > > cannot find `SOMI1' >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc:93: >> > > cannot find `UCLK1' >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc:94: >> > > cannot find `URXD1' >> > > /home/tiny2/tinyos-main/tos/chips/msp430/usart/HplMsp430Usart1C.nc:95: >> > > cannot find `UTXD1' >> > > /home/tiny2/tinyos-main/tos/chips/cc2420/lpl/DummyLplC.nc:39:2: >> warning: >> > > #warning "*** LOW POWER COMMUNICATIONS DISABLED ***" >> > > make: *** [exe0] Error 1 >> > > >> > > I hope you can help or give me a little advice. >> > > >> > > I am looking forward to your answer >> > > >> > > Best regards, >> > > >> > > Andre >> > > >> > > >> > > _______________________________________________ >> > > Shimmer-users mailing list >> > > [email protected] >> > > https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users >> > > >> > >> > >> > >> > -- >> > Eric B. Decker >> > Senior (over 50 :-) Researcher >> _______________________________________________ >> Shimmer-users mailing list >> [email protected] >> https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users >> > > >
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
