Hi Ulf, Is your Shimmer device fully charged? Can you switch the device off and back on and try connecting again?
Best regards, JC -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ulf Jensen Sent: 06 March 2014 13:12 To: [email protected] Subject: [Shimmer-users] ShimmerExample issue with Shimmer3 Hello, I am trying to create an Android App based on the Shimmer Android Driver Library 2.2. I followed the user manual (Shimmer_Android_Instrument_Driver_User_Manual_rev2.2a.pdf) to run the ShimmerExample application. I flashed the recent firmware (BtStream_v0.2.0_shimmer3.txt) and replaced the bluetoothAddress with the correct device address from one of our sensors. When I run the app, the sensor LED turns blue but the streaming won't start and the connection state ends up in "No state". I get this log output from the Shimmer Example application: . 03-06 13:55:54.291: D/Shimmer(32745): Start of Default ConnectThread 03-06 13:55:54.301: D/ConnectionStatus(32745): Trying 03-06 13:55:54.311: W/BluetoothAdapter(32745): getBluetoothService() called with no BluetoothManagerCallback . 03-06 13:55:54.311: D/BluetoothSocket(32745): connect(), SocketState: INIT, mPfd: {ParcelFileDescriptor: FileDescriptor[48]} 03-06 13:55:54.321: D/ConnectionStatus(32745): Connecting . 03-06 13:55:55.391: D/Shimmer(32745): Command Transmitted: [3] 03-06 13:55:55.391: D/Shimmer(32745): Command transmitted: 00:06:66:64:71:82; Command Issued: 3 03-06 13:55:55.391: D/ShimmerTimer(32745): Waiting for ack/response for command: 3 03-06 13:55:57.391: D/ShimmerSamlingRate(32745): Get Sampling Rate Timeout 03-06 13:55:57.391: D/Shimmer(32745): Command Transmitted: [46] 03-06 13:55:57.391: D/Shimmer(32745): Command transmitted: 00:06:66:64:71:82; Command Issued: 46 03-06 13:55:57.391: D/ShimmerTimer(32745): Waiting for ack/response for command: 46 ... 03-06 13:55:59.391: D/ShimmerFW(32745): FW Response Timeout 03-06 13:55:59.401: D/Shimmer(32745): Command Transmitted: [3] 03-06 13:55:59.401: D/Shimmer(32745): Command transmitted: 00:06:66:64:71:82; Command Issued: 3 03-06 13:55:59.401: D/ShimmerTimer(32745): Waiting for ack/response for command: 3 03-06 13:56:01.401: D/Shimmer(32745): Command 3 failed; Killing Connection 03-06 13:56:01.401: D/ConnectionStatus(32745): No State What is going wrong here? Can somebody provide a working example for the connection to a Shimmer3 sensor? Cheers, Ulf Jensen Dipl.-Inf. Ulf Jensen Digital Sports Group Pattern Recognition Lab Friedrich-Alexander-University Erlangen-Nuremberg Haberstr. 2, 91058 Erlangen, Germany Phone: +49 (0)9131 / 85-27890 E-Mail: [email protected] Web: www5.informatik.uni-erlangen.de/~jensen _______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users _______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
