Hi Jong, I have Low noise accelerometer, wide range accelerometer, gyroscope, and magnetometer enabled. I also have enabled battery voltage.
thanks, Shri > On Feb 9, 2015, at 5:37 AM, Jong Chern <[email protected]> wrote: > > Hi Shri, > > Sorry to hear about your troubles. May I ask as to what sensors you have > enabled on your Shimmer device? > > Best regards, > Jong Chern > > On 09/02/2015 04:05, Shrirang Mare wrote: >> >> I can't seem to get data from Shimmer3 at sampling rate higher than 340Hz. >> >> I configured my Shimmer3 using the ShimmerCapture Android app and set the >> sampling rate to 1024 but the data being saved to the file is at about >> 341Hz. When I set the sampling rate of the Shimmer3 to 512Hz, it actually >> logs data at about 256Hz. >> >> Any ideas on how to get higher sampling rates on Shimmer3? I am looking to >> get 1024 Hz. >> >> I have another Shimmer3 and I tried sampling at 1024 and 2048Hz on it too >> but I get about 400 and 450Hz sampling rates. Or is it that both the >> Shimmers have some hardware problem? Any ideas on what might be wrong or if >> I'm missing something. >> >> The Shimmer3 is running BT_Stream firmware version 0.5 >> >> thanks, >> Shri >> >> >> _______________________________________________ >> Shimmer-users mailing list >> [email protected] <mailto:[email protected]> >> https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users >> <https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users> >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com <http://www.avg.com/> >> Version: 2013.0.3495 / Virus Database: 4257/9077 - Release Date: 02/08/15 >> > > _______________________________________________ > Shimmer-users mailing list > [email protected] > https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
