Hi Jong,

The reason we want to stream data into Matlab the same time as we collect data via Shimmer GUI is that we want to monitor multiple sensors to make sure they function well during our experiment (In some rare occasions, one sensor drops out or one channel of a sensor drops). Since we can't use both in the same time, can we (1) have data streaming on one computer to serve as a monitor, and data collecting on another computer via Shimmer GUI? or (2) customize the Shimmer GUI setting so that it displays more than 4 plots (so far only plots are shown)?

If we could stream synch-ed data from multiple sensors into Matlab, we would plot and save the data all in Matlab. Can we synchronize them?

Best,
Weiguang

On 20/02/2015 9:44 AM, Weiguang guan wrote:
Hi Jong Chern,

Thank you for your time. Here I'm helping a research group with the motion data acquisition, and I'll ask them if they need both in the same time. I personally don't think it's necessary. Thanks again for answering my question.

Best,
Weiguang

On 20/02/2015 1:37 AM, Jong Chern Lim wrote:
Hi Weiguang,

Yes we no longer host the Shimmer Matlab Insrument Driver (files) on our
site, the link you posted below is the correct one.

1) Is it free of charge?
- The Shimmer Matlab Instrument Driver is but Matlab is not.

2) When someone uses the instrument driver to stream data in matlab, can
he use the Shimmer Conect in the same time?
- No. If you explained your use case I might be able to advice further.

I hope that helps.

Best regards,
Jong Chern


-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Weiguang guan
Sent: 20 February 2015 03:07
To: [email protected]
Subject: [Shimmer-users] Streaming motion data live from Shimmer units

Hi,

Does someone have experience with the Shimmer Matlab Instrument driver?
The official Shimmer website doesn't have a download link (least no
clickable download link). But I find one at

http://www.mathworks.com/matlabcentral/fileexchange/43712-shimmer-matlab-ins
trument-driver

Two questions:
1) Is it free of charge?
2) When someone uses the instrument driver to stream data in matlab, can
he use the Shimmer Conect in the same time?

Best,
Weiguang
_______________________________________________
Shimmer-users mailing list
[email protected]
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3495 / Virus Database: 4257/9143 - Release Date: 02/19/15


_______________________________________________
Shimmer-users mailing list
[email protected]
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users


_______________________________________________
Shimmer-users mailing list
[email protected]
https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users

Reply via email to