That's strange.....on mine, it's white on green.... Royce -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of skismith Sent: Thursday, March 13, 2003 8:06 PM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: Wood head problem
Dean, ask your friend to change the background on his menu list on the left. Blue on gray is tough to read for the old guys like me! Gerry Dean wrote: > It's a commercially available OnCourse 13 wood with 46 degrees loft. The head is cast steel. I pick it up in Texas at a friends > shop. www.hoffmangolf.com also lists them. If I hold the shaft as for my normal woods, the face appears over 5 degrees open. Really > not a winner. > DeanS > > ----- Original Message ----- > From: "Al Taylor" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, March 13, 2003 10:03 AM > Subject: Re: ShopTalk: Wood head problem > > > So, if you bring the head back to normal address, with sole flat on ground, > > the head appears open, correct? Remember they used to make heads open 2 or > > 3 degrees as normal. Sometimes older wood heads will appear more open than > > actual due to the bulge and roll. Interesting stuff. What kind of a head > > is it? Wood wood blank? Got me curious now. > > > > Al > > > > At 02:40 PM 3/13/2003, you wrote: > > >On a sample wood head that is 46 degrees I ran into a strange looking > > >problem. When setting with the sole flat on the floor, the > > >head is about 6" ahead of the butt of the shaft. The hosel is the same in > > >others of the set so it must be designed that way. If I > > >square up the shaft and face to hit a ball in the right direction, the > > >back of the head is 1/2" off the ground! Until I noticed this > > >I kind of liked the wood. Anyone know why something like this wood be used?? > > >DeanS > > > >
