The one I use is a wide jaw C clamp, I think I got it
from home depot or builders square
George
--- Jeremy Ingle <[EMAIL PROTECTED]> wrote:
> George re vive clamp what a great idea I have had
> some trouble with the
> rubber jaws themselves pulling out of the clamp. who
> makes the prometal
> vice clamp is it some thing I can get from home
> depot here in Canada?
>
> jeremy ingle
>
> GEORGE HUSON wrote:
>
> > Pat,
> > On bore-thru I add an additional clamp behind RK's
> > puller, I use the Pro Metal Vice Clamp from GS
> #8288
> > with a wide body screw clamp that I made. I found
> that
> > by adding twice the clamp surface, you can pull
> almost
> > any standard head with very little heat, and the
> > bore-thru's with about the same heat that you need
> for
> > a standard head with one clamp. I use a mini
> butane,
> > heat the head, add a little tension, wait 1
> minute,
> > reheat and pull the head, Hope this helps.
> >
> > George Huson
> > ByGeorge Custom Clubs
> >
> > --- [EMAIL PROTECTED] wrote:
> > > $10 to pull and save the shaft? I just finished
> > > pulling the head and I have to tell you that
> ranks
> > > up there with the 975's as one of the most
> difficult
> > > heads to pull. I am still having problems with
> the
> > > shaft slipping through the rubber clamp on
> Kennedy's
> > > puller. I guess I just don't have enough
> confidence
> > > to apply the pressure needed without the fear of
> > > smashing the shaft. $110 sounds reasonable
> enough.
> > > Thanks for your quick responses.
> > > Pat McGoldrick--On Target Golf
> > > [EMAIL PROTECTED]
> > >
> > > --- Original Message -----
> > > From: [EMAIL PROTECTED]
> > > To: [EMAIL PROTECTED]
> > > Sent: Wednesday, September 24, 2003 8:55 PM
> > > Subject: Re: ShopTalk: FUJIKURA RESHAFT
> > >
> > >
> > > In a message dated 9/24/03 4:03:03 PM Pacific
> > > Daylight Time, [EMAIL PROTECTED] writes:
> > >
> > >
> > >
> > >
> > > I have a customer that wants his GBB II
> > > reshafted with a Vista Pro 60 shaft, could
> someone
> > > give me some kind of indication of the going
> rate
> > > for a reshaft with this shaft? This will be my
> first
> > > reshaft of the GBB II and my first experience
> with
> > > any Fujikura shaft. TIA
> > > Pat McGoldrick--On Target Golf
> > > [EMAIL PROTECTED]
> > >
> > >
> > >
> > > Hi Pat,
> > > I charge $10.00 for the pull, $70.00 for the
> > > shaft, $19.00 on the build including spineing
> and
> > > flowing, and $10.00 on the bore thru, so that's
> > > $109.00, if they just want it stuck with the
> logo up
> > > or down without spineing and flowing the build
> is
> > > $9.00 instead of $19.00.
> > > David
> > >
>
