RE: ShopTalk: Constant frequency

[Michael Pogor]

My apologies David,   I forgot to state that I start with a base difference of 30 cpm between irons and woods. Hence, the 270 cpm number. With some graphite shafts, I have used adjustment factors of 30 cpm, plus a depth of insertion value of up to 7 or 8 cpm.   For the Grafalloy Pro-lite,   270 (base cpm) - 17 (cpm adjustment factor for shaft) – 5 (cpm adjustment for many wood heads) = 248 cpm.   Hope this makes more sense!   Mike   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: October 1, 2003 2:15 AM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: Constant frequency   In a message dated 9/30/2003 6:04:59 PM Pacific Daylight Time, [EMAIL PROTECTED] writes: It depends on what shaft you are talking about.   My frequency with irons is 300, yet I have made up drivers with frequencies reading between 235 cpm and 270 cpm.   It depends on the shaft!   For example, I think that the “adjustment factor” for a Grafalloy Pro-lite is about 17 cpm. Plus, depending on the depth of insertion into the head, that number can be affected further.   Mike   Hi Mike, That would suggest that my # with a Graf Pro Lt would be 277 and that is not with in 30 cpms of my # with that shaft, unless I figured wrong somewhere. David