Harry thanks To answer your question re frequencies the figures are from the manufacturer I bought frequecy matched Alpha L flex shafts.
I went to look at the web site you reccomend it looks very complicated and I dont have Exel . I have this set of components I know its not ideal can anyone tell me exactly the tip or butt trim I need and the weight I need to add :for each club Assume a 50 gm grip. I am really pretty desperate as I might have to start again with new Components which will be an expensive hassle as it took me 4or 5 triies to get these components approved Also My proffessional pride is being threatened by a visit to the Ping fitter at our local club.!! Regards Jeremy. "Harry F. Schiestel" wrote: > Hi Jeremy > > First look at this web site for specialized clubmaking software. > FSMatching Program. http://home.att.net/~fsmatching > Please contact CHSilcoJr [ CHSilcoJr @ worldnet.att.net ] > > Now to review the quality of the heads relative to weight: > 3---237.5 Wt. Spec = 239 g Head Wt. = -1.5 grams > 4---244.0 Wt. Spec = 246 g Head Wt. = -2.0 grams > 5---254.0 Wt. Spec = 253 g Head Wt. = +1.0 grams > 6---259.5 Wt. Spec = 260 g Head Wt. = -0.5 grams > 7---268.5 Wt. Spec = 267 g Head Wt. = +1.5 grams > 8---273.0 Wt. Spec = 274 g Head Wt. = -1.0 grams > 9---278.5 Wt. Spec = 281 g Head Wt. = -2.5 grams > PW-289.5 Wt. Spec = 288 g Head Wt. = +1.5 grams > > Your SSFF set of heads vary from -2.5 grams to +1.5 = 4.0 grams total > variance. > Golfsmith reports a weight specification of +2 / -3 grams on this model of > iron head. > Over a sample of 8 heads, 80% (4.0/5.0) of the weight tolerance is being > used. > > Not the weight range I would use for my set of irons. My son (0 hcp) is > building new Mizuno MP-30T > irons and the heads were sorted to 0.5 g total variance. We pulled the > heads before they were ever > hit. An expensive way just to get a set of LH forgings. Definitely > overkill for nearly most golfers. > > Jeremy, were the raw shaft frequencies with the logo up or relative to the > spine alignment plane? > > Your wife will be a single digit player in no time ... good for her! > > Thanks Harry S > www.Golf54.com > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Jeremy Ingle > Sent: January 21, 2004 1:13 PM > To: [EMAIL PROTECTED] > Subject: ShopTalk: frequency matching > > I need to build a set of frequecy matched Irons for my wife ( 12 > Index) This is what I have > > Fire forged Iron heads weight as follows in gms. > > 3---237.5 > > 4---244.0 > > 5---254.0 > > 6---259.5 > > 7---268.5 > > 8---273.0 > > 9---278.5 > > PW-289.5 > > Shaft raw frequencies 268-270-270-271-271-272-273-273 weight 68 grms. > > I need a finished flex stiffer that a normal lady flex > Can any one calculate for me how to cut and if neccessary add weight > to get a D+- swingweight? You can contact me direct if you like. > Regards Jeremy
