Subj: Re: ShopTalk: FSMatching Program
Date: 1/23/2004 7:02:54 AM Pacific Standard Time
From: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent from the Internet
Harry thanks To answer your question re frequencies the figures are from
the manufacturer I bought frequecy matched Alpha L flex shafts.
I went to look at the web site you reccomend it looks very complicated and I
dont have Exel . I have this set of components I know its not ideal can anyone
tell me exactly the tip or butt trim I need and the weight I need to add
:for each club Assume a 50 gm grip.
I am really pretty desperate as I might have to start again with new
Components which will be an expensive hassle as it took me 4or 5 triies to
get these components approved Also My proffessional pride is being
threatened by a visit to the Ping fitter at our local club.!!
Regards Jeremy.
"Harry F. Schiestel" wrote:
>Hi Jeremy
>
>First look at this web site for specialized clubmaking software.
>FSMatching Program. http://home.att.net/~fsmatching
>Please contact CHSilcoJr [ CHSilcoJr @ worldnet.att.net ]
>
>Now to review the quality of the heads relative to weight:
>3---237.5 Wt. Spec = 239 g Head Wt. = -1.5 grams
>4---244.0 Wt. Spec = 246 g Head Wt. = -2.0 grams
>5---254.0 Wt. Spec = 253 g Head Wt. = +1.0 grams
>6---259.5 Wt. Spec = 260 g Head Wt. = -0.5 grams
>7---268.5 Wt. Spec = 267 g Head Wt. = +1.5 grams
>8---273.0 Wt. Spec = 274 g Head Wt. = -1.0 grams
>9---278.5 Wt. Spec = 281 g Head Wt. = -2.5 grams
>PW-289.5 Wt. Spec = 288 g Head Wt. = +1.5 grams
Hi Jeremy,
I'll try to help, it's about 1:00 in the morrning so pardon me if I mis spell.
1st of all if you have the Kent sports alpha shafts then you are well on your way home, these are the same as the Vector Tour Class and will come out perfect if you match your head and grip wt's and are exact in your length's
Your biggest problem is getting a high enough swing weight using this light of a shaft with this light of a head, what you will need to do is take your 7 iron at 268.5 gr which is your heaviest head relative to spec. and mock it up at playing length on the shaft designated for the 7 iron, if you slip on a split grip it at the top of the butt it should measure 38", which is 1" over mens standard, move it down 2" for ladies standard and secure it in your swingweight scale, this will give you your sw's through out the set providing you add weight to all the other heads to keep them on 7 gram increments off your 7 iron.
David
