Bruce, Was that the freq on the bent shaft? If so, then the Release will work because 276cpm is about all you can get out of 39" 3-Iron. It's a real wimp but works great for slow swingspeeds and smooth tempo (old folks ;-)
Cub ----- Original Message ----- From: "BeeTeeGolf" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 05, 2004 2:25 PM Subject: Re: ShopTalk: Titleist DCI 822 OS shaft > Cub, the frequency on my Club Scout III for the club gave me a 276 at > 39 inches (3 iron). The chart was one I down loaded from GS a month > or so ago. > > Bruce > > >Bruce, > > > >The Release, even the one marked "A or Men's" will not get you to an "R" on > >a frequency scale. Therein lies the problem. What is the actual flex of > >the DCI shaft when measured in frequency? I don't know. Which replacement > >guide are you using? > > > >Cub > > > >----- Original Message ----- > >From: "BeeTeeGolf" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Saturday, June 05, 2004 1:02 PM > >Subject: ShopTalk: Titleist DCI 822 OS shaft > > > > > >> Got a Titleist DCI 822 OS iron in with a bent shaft. My replacement > >> guide says a TT Release is a close replacement. Is this true? The > >> Titleist is an R flex, will a Release give me enough frequency for > >> and R flex? > >> > >> Bruce > >> > >
