Re: ShopTalk: Re:

[jhm]

Title: Re: ShopTalk: Re:

You'd think the "wear a glove" thing would be obvious. It's not all that obvious, and it hurts like hell.

John

shoptalk

If they're steel shafts you don't need a shaft puller/head pusher. Just heat the hosel and twist/pull the shaft. Wear a glove.

 

TFlan

----- Original Message -----

From: [EMAIL PROTECTED]

To: ShopTalk@mail.msen.com

Sent: Monday, January 24, 2005 2:09 PM

Subject: Re: ShopTalk: Re:

Hello TFlan,

Thanks a lot, You have helped a great deal. My original thought was to drill it out, but I was afraid it may have been a hardened screw or dowel. I didn't want to damage the hosels or shafts That worried me the most. If it is soft metal, it should not be too difficult at all. I will torch the shafts and use my shaft puller after I get the pin removed. Since they are forged they should clean up real good.

 

Thanks again.

Tom

--

-- 

Thanks!
John Muir
http://clubmaker-online.com
http://gripscience.com
http://elevongolf.com
810.923.7396