|
If you like to work, sure.
Cub
----- Original Message -----
Sent: Monday, May 02, 2005 2:56 AM
Subject: Re: ShopTalk: Taper Tip or
Parallel?
Can you use a small hacksaw to slit the
tips?
Jeremy.
comgolf wrote:
Many Thanks Guy's !!!!
-----
Original Message -----
Sent:
Saturday, April 30, 2005 9:35 PM
Subject:
Re: ShopTalk: Taper Tip or Parallel?
Tflan is right, its the same for steel or graphite. I've done a
number of sets and the dremel
is the way to go. Any Pings I'm aware of are taper.
Beg
to disagree. Callaway's are a strange breed. The very bottom of the
hosel at the sole is a little smaller diameter than the rest of the
hosel
bore. Notice that all the Callaway tips are slit . . . three
crossways cuts
. . . across the bottom of the tip. The tips are
shoved into the hosel and a
plastic plug is hammered in, expanding
the slits against the hosel wall.
Sort of a built-in shim. The
process can be matched by slitting a tip with a
dremel tool, or the
bottom of the hosel can be bored out and a standard
.370" tip shaft
can be inserted.
In either case, the shafts are not taper
tip.
TFlan
----- Original Message -----
From:
"comgolf"
To:
Sent: Saturday, April 30, 2005 8:32 AM
Subject:
Re: ShopTalk: Taper Tip or Parallel?
> The Callaways are
ta! per tip.
>
> I also have the same question for the Ping
I/3 irons....... as I haven't
> re-shafted any of these till
now.
>
> MTIA
> Jay
>
> ----- Original
Message -----
> From: "Greg Zachmann"
> To:
>
Sent: Saturday, April 30, 2005 11:10 AM
> Subject: ShopTalk: Taper
Tip or Parallel?
>
>
>> I haven't worked with the
Callaway X 16 irons and wanted to verify that
>> these are
taper tip.
>>
>> TIA,
>>
>>
GregZ
>>
>>
>>
>>
>>
>
>
Carl
Mc Kinley Retired,
PCS Certified Class 'A' Clubmaker (Life
Member)
GCA Accredited Clubbuilder
[EMAIL PROTECTED]
P T
Barnum is the patron saint of expensive club manufacturers.
__________________________________________________
Do You
Yahoo!?
Tired of sp! am? Yahoo! Mail has the best spam protection
around
http://mail.yahoo.com
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.11.1 - Release Date: 02/05/2005
|
