You got it! Colin
Colin Dick- GCA Accredited Professional Clubmaker SpineMaster Mk.II And Spining Information on http://members.shaw.ca/cgdick/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marcello Franchi Sent: June 27, 2005 9:29 AM To: [email protected] Subject: Re: ShopTalk: Cork problem Hi Colin, thanks a lot, at a first glance maybe A and B are exchanged, as I assume the third figure is the height and the first two are the diameters. I'll look for something similar. Thanks again and ciao, Marcello 2005/6/27, Colin Dick <[EMAIL PROTECTED]>: > Hi Marcello, > > I have none I can send you, but here are the GS numbers > > 882A--8mm x 5.9mm x 12.36mm > 882B--9.29mm x 7.47mm x 12.34mm > 882C--6.09mm x 4.31mm x 12.33mm > > The A are Irons- Steel Shafts > The B are Woods- Steel Shafts > The C are for small centre Graphite shafts. Larger centre Graphite > shafts use the B size. They need to be tight. [snip]
