Re: ShopTalk: Lynx Black CAT flare tip Irons

[tflan]

Shimming? Well, it depends on what you're using for a shaft. I'll tell you though that the hosel bore depth is really shallow . . . about an inch. I reshafted a couple of those monsters about 4 - 5 months ago with .370" tip graphite shafts. and it was touch and go. I told the guy that he should hit the clubs on the range when nobody was there, in case the heads flew off. Thankfully they didn't and the guy's still using them.   Ferrules? I reamed out a couple of .370" iron ferrules by hand, using a .400" drill bit held with a vise-grip and ferrule squeezed in a shaft clamp. . . took forever but it worked.   TFlan   ----- Original Message ----- From: Pat-On Target Golf LLC To: ShopTalk@mail.msen.com Sent: Wednesday, June 29, 2005 3:53 PM Subject: ShopTalk: Lynx Black CAT flare tip Irons I have two Black Cat irons a customer brought in for resetting of heads and both ferrules are missing. Is there a ferrule out there that will work on these flare tip irons?  The ID is approx. .410". Also, is there any shimming that needs to be done on these?  TIA Pat-On Target Golf LLC Turnersville, NJ [EMAIL PROTECTED]