RE: ShopTalk: Odyssey 2 Ball putter

[John Hyde]

Dear Ed:   I bend them all the time.  I use a Mitchell putter Loft/lie machine.  It comes with two types of bending tools.  You need to bend this at the hosel tip with a small bending bar or you can remove shaft from putter and bend hosel tip then put shaft back on putter.   John     -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ed Reeder Sent: Wednesday, March 22, 2006 5:24 PM To: ShopTalk@mail.msen.com Subject: Re: ShopTalk: Odyssey 2 Ball putter   Pat, I was hoping that someone else would reply to this one with a good technique.  I have bent the shaft on this putter, but it was a REAL PITA.  The shaft was almost impossible to bend.  I ended up having to heat the shaft almost cherry red before it would do anything.  I got most of the scorch marks off the shaft, but there was definite discoloration. /Ed Pat-On Target Golf LLC wrote: I need to bend a Odyssey 2 Ball putter with the White Steel shaft 2* Flat.  I have a putter shaft bending tool but have never bent one of these putters with the crimped shaft.  Is there anything I should be aware of before I try this? Pat-On Target Golf LLC Turnersville, NJ [EMAIL PROTECTED]