First thing to find out is what the tip I.D. is for the shaft adapter piece. So if you have that then clean it up or out and take a micrometer to it, find out what tip size your looking for and go from there.
Sincerely, Robert Devino 14252 Delano St. Van Nuys, Ca. 91401 (818) 770-0475 ________________________________ From: "j...@clubmaker-online.com" <j...@clubmaker-online.com> To: ShopTalk@mail.msen.com Sent: Monday, January 26, 2009 1:31:37 PM Subject: Re: ShopTalk: Joining in talk We were trying to figure out the tip diameter on the MWT with the interchangeable hosel. Jerry thought it was .400. Anyone reshaft one of these?? John I got this address from John as I was trying to find a shaft that would fit a TM 460 MWT Superquad r7 with quick change capabilities. The shaft can be secured into the head with a wrenchable nut, not glued in. Any ideas would be appreciated. Thanks. Jerry EMI Music Maintenance - -------------------------------------------------------------------- Music from EMI This e-mail including any attachments is confidential and may be legally privileged. If you have received it in error please advise the sender immediately by return email and then delete it from your system. The unauthorised use, distribution, copying or alteration of this email is strictly forbidden. If you need assistance please contact us on +44 20 7795 7000. This email is from a unit or subsidiary of EMI Group Limited. Registered Office: 27 Wrights Lane, London W8 5SW Registered in England No 229231. - -------------------------------------------------------------------- -- Thanks! John Muir skype: jhmuir AIM: golfcas...@mac.com 810.923.7396 http://clubmaker-online.com http://gripscience.com clubmaker.mobi sponsored by http://aldilavoodoo.com
